IanF's latest activity

  • I
    IanF reacted to knuckle_heavy_knives's post in the thread Hello world with Like Like.
    I've been on this forum for a long time but only as a viewer, if ever I had a question, I would look for the answer here. I also love to...
  • I
    IanF reacted to CDHumiston's post in the thread Makers Mark Stencils Comparison with Like Like.
    I know this subject comes up now and then so I thought I may be able to provide some insight. I recently ordered stencils from three...
  • I
    IanF reacted to Nick Riggi's post in the thread What's going on in your shop? with Like Like.
    Just Flamed Anodized this Ti Framelock- just need to grind the blade. This is the 5th Ti Framelock I have built now- getting the hang...
  • I
    IanF reacted to BossDog's post in the thread What's going on in your shop? with Like Like.
    the Midwest Knifemakers Guild hosted a Hammer In at USAknifemaker this weekend. 2 things to consider if you haven’t. 1. Join a...
  • I
    IanF reacted to Jesse Latham's post in the thread My new tool with Like Like.
    I finally got around to building my press. 7' 2" tall. 4" cylinder, 12" throw, 11 gpm pump, 5 hp 3650 rpm motor. And the first knife...
  • I
    IanF replied to the thread Pivot length..
    I do a slightly different way. First put some marker or layout dye on the pivot to mark the length I am aiming for. Then take some...
  • I
    IanF replied to the thread Framelock flipper.
    The pivot on this one has a screw from each side but yes I did also need to shorten the length. It is pretty rare that you get a pivot...
  • I
    IanF reacted to Aroldo's post in the thread Takefu hunter drop point with Like Like.
    Hello everyone, i show you a different version of the classic Loveless hunter drop point. Takefu Suminagashi white steel 22 layers with...
  • I
    IanF reacted to BlueBird's post in the thread My new CNC knife project with Like Like.
    Hi ! My CNC is a Tormach 440. Pretty small and limited machine. 0.75HP and approx 10"x6" working area. Not "expensive", but good little...
  • I
    IanF reacted to BlueBird's post in the thread My new CNC knife project with Like Like.
    Hi guys, still working on prototype, nothing is finish, but i will start by showing you some pictures first. I start making hole in...
Top