KenH's latest activity

8" diameter seems small after adding a couple inches of insulation.

Hello everyone, I'm very new but have been doing research for a long time now, a YouTube pro is what I call it. Bahahah. I have my...

Ok, so I am running my lasers on a desktop CNC control board. I found out my CNC S value (spindle speed) was 10,000, but my laser S...

A 30# propane tank makes a good forge - usually the local propane company has several old decommissioned tanks (20 mostly which will...

Knife Rights applauds President Trump’s Executive Order Guaranteeing Fair Banking for All Americans. For many years banks have...

What part of the world are you in? You can see where I am in my profile - if you're anywhere close I might have a spare venturi burner...

I seriously doubt a pizza stone will work. Remember the forge will be well above 2,000°F, I suspect the pizza stone will break - won't...

For the low RPM bronze bushings I'll bet the bedding epoxy will work just fine. I remember this thread from last yr - Glad you updated...

I couldn’t get a picture to load, but I’ve got it stripped down, and now I have to get a hundred years worth of old paint and goop off...

Picked up a 2W IR laser and started playing with it! It's the Sculpfun IR 2 that was on sale recently and I mounted it to my Anolex CNC...

Oops, I missed the question until this morning. I've got a Gweike G2 Pro fiber laser. Seems to work pretty good, I did this to play...

Those lasers are simply amazing for sure. I've had a 10 watt diode laser for a couple yr, and it "works" to make nice marks on the...

Like most of you who use one, I've lasered a bunch of different things on blades. This is the latest. AEB-L with spalted maple. If...

Ok, thanks for the input! We'll see if I get to it this summer

Those keyhole bolster/scales have always impressed me with the looks, and amount of skill required to do them. I've looked at the idea...