One Armed's latest activity

  • O
    One Armed reacted to BossDog's post in the thread What's going on in your shop? with Like Like.
    My forged pattern welded titanium and mosaic sanmai damascus blade. Bearing set up. Most work on a knife for me than any other to date.
  • O
    One Armed replied to the thread What's going on in your shop?.
    Very nice Ty. It’s very similar to my Small Hunter at the top of this world page.
  • O
    One Armed replied to the thread Cpm 3v.
    I know this has gone this long with no say, but it hasn’t occurred to me until today to give a tip. Steel makers like Crucible come up...
  • O
    One Armed replied to the thread Could use some Advice!.
    Right on brother! Glad to hear it. Yes, as I had said I “thought” I knew how to sharpen bits pretty good....that I saw that video & it...
  • O
    One Armed replied to the thread My Surface Grinder Attachment.
    Oh Jeremy, btw..... you had mentioned need to refresh your memory on choosing the thickness to taper your tang, right? Easy way is to...
  • O
    One Armed replied to the thread Plunge line struggle.
    I can’t tell you how difficult getting plunges has been with only one arm/hand....Ugh! :( I don’t get each one perfect as some do...
  • O
    One Armed replied to the thread My Surface Grinder Attachment.
    I don’t believe dressing the wheel is really going to offer much benefit even in the best of circumstances. Which of course would be on...
  • O
    One Armed replied to the thread Could use some Advice!.
    I can, it’s just difficult to explain in text. I’ll try to put together a video and link it here, if no objections? Or I’ll just PM you...
  • O
    One Armed replied to the thread Newbie questions..
    That is the truth. In fact, you can build a nice belt grinder, a good furnace, heat treat oven, hammer, tongs & STILL have enough for a...
  • O
    One Armed replied to the thread Newbie questions..
    This ain’t bad advice really. My first grinder was a Dayton 2x48 that I converted to 2x78 with an aluminum arm & a wheel. I bought it...
  • O
    One Armed replied to the thread Newbie questions..
    For steels, I generally go USAKnifemaker, AlphaKnife & NJsteel baron as Heikki point out. I to started with O1, but then switched to...
  • O
    One Armed replied to the thread Doctors knife kit advice.
    I second, third & fourth that, over! Tracy is a regular guy like us. I really like that he’s a Knifemaker and DIY’er, as many of us are...
  • O
    One Armed replied to the thread Could use some Advice!.
    I know this is kinda old, but I typically buy ONLY M42 Cobalt bits. Amazon, you can find whatever size you need.... usually in singles...
  • O
    One Armed replied to the thread My Surface Grinder Attachment.
    This is with the magnets epoxied in the Chuck Jeremy? Another thing... I don’t use anything below a 120grit. And I go very shallow with...
  • O
    One Armed replied to the thread What's going on in your shop?.
    Thank you kindly Ted. Would you believe that was an accidental design? Started as just a “one off” gift for a close friend. He’s a very...
Top