Search results

  1. M

    What to use

    Thanks
  2. M

    What to use

    Thanks
  3. M

    What to use

    Thank you sir.
  4. M

    What to use

    New guy here. I’m using. 1075 and 15N20 for some Damascus and which quench oil do I use and can I use the same stuff to quench straight 10 series, 80crv2, 52100, ect. Also is what should the oil temp be before the quench? Thanks
  5. M

    Calculating steel

    Thanks
  6. M

    Calculating steel

    Thanks
  7. M

    Calculating steel

    Thanks
  8. M

    Calculating steel

    Now that’s what I’m talkin about! I knew all that math I took would come in handy. I’ll have to go back and read up because I don’t remember studying the swish factor, must of missed that day. Thank you, sir. Heading to the forge to squish some shit out!! Lol
  9. M

    Calculating steel

    Appreciate your input and I am forging.
  10. M

    Calculating steel

    New to this. Is there to estimate or calculate the needed steel for each knife project?
  11. M

    Equipment info

    Thanks
  12. M

    Equipment info

  13. M

    Equipment info

    Thanks
  14. M

    Equipment info

    Thanks for the info.
  15. M

    Equipment info

    Just getting started as a small time hobbiest. What’s a good starting point for a sander ( pls be specific) it probably won’t be upgraded. Knife steel-hot or cold rolled, starting point 1080 ect. Not wanting to just stock removal but using a forge. 3/16 or 1/4 inch? I’ve got a forge, hammer...
  16. M

    Forge ???

    I’m 66y/o and just starting. I was gifted a Hell’s Forge 2 burner, 2300 degree forge. I haven’t unpacked it yet and hoping to get some advice as to whether to keep it or get something diff. Wanting to do some straight blades with mono steel, and some Damascus, etc. will this forge do what I need...
Top