Search results

  1. Chuck Gedraitis Knives

    Damascus bolster sets/material for sale

    For sale are 9 sets of mosaic damascus bolsters made by Joel Davis, Bob Eggerling and Chris Marks. Some have 3 pieces and there are 3 larger pieces that could be cut in half to make into a pair of bolsters. Approximate sizes are listed and the thinnest ones are .100 thick. Looking to sell as a...
  2. Chuck Gedraitis Knives

    Vintage rag micarta pieces for sale

    This is vintage rag micarta made in 1954 and was cut from Army mess hall trays. These pieces could be used for shields, inlays, or if cut correctly small folders or even thumbstuds or disc's. The mat the material is on is 13X9. Price is $225 delivered.
  3. Chuck Gedraitis Knives

    Titanium pocket clip blanks for sale.

    Titanium pocket clip blanks for sale. These are for milled pocket clips. 2-3/8in long, .155 thick. 40 pieces total. $110 delivered. These are sold
  4. Chuck Gedraitis Knives

    No rust cooling dip

    Just add baking soda to the dip bucket, does the same thing.
  5. Chuck Gedraitis Knives

    NCCA Knife show Sunday Nov, 6th in Marlborough, Ma.

    I will be exhibiting at this show on Sunday, please stop by if you have the time. MARLBORO, MA KNIFE SHOW Sunday, November 6th, 2016 Marlboro, MA - Holiday Inn (508) 481-3000 I-495 exit 24A. Show hours: 9am-2pm
  6. Chuck Gedraitis Knives

    Chuck Gedraitis Custom slip-joint for sale

    Hello, Available for sale is one of my custom slip-joints. The blade is 2-9/16in long made of Rob Thomas ladder pattern stainless damascus and opens with a long pull. The bolsters are titanium with a light orange peel finish and have been heat colored bronze. The scales are polished black...
  7. Chuck Gedraitis Knives

    WTB Antique westinghouse micarta

    WTB Antique westinghouse micarta, let me know if you have any you would be willing to part with. Thanks, Chuck
  8. Chuck Gedraitis Knives

    Kit Carson small model 4 for sale

    Up for sale is a Kit Carson small Model 4 liner lock. 3-3/16 ATS-34 blade with a bead blast finish. Sand blasted titanium liners and bolsters with kydex scales and black G-10 spacer. 7-9/16 overall open with dual thumbstuds and tip down carry clip. Good condition with some handling marks...
  9. Chuck Gedraitis Knives

    Getting knives to out of state shows

    IF you don't own a gun or the proper permits to be transporting them across state lines then you are out of luck. I mail my knives on Tuesday before a show and let the hotel receiving them know so they accept the package. Mailing them early gives the carrier time to get them to me before the...
  10. Chuck Gedraitis Knives

    Chuck Gedraitis triple bolster liner lock folding dagger for sale

    Hello, I hope that you are keeping warm this winter. I haven't made anything like this for a while and most likely won't make anything similar anytime in the near future so this would be the chance to add a unique piece to your collection. The blade is 4-7/8in long made of Darryl Meier...
  11. Chuck Gedraitis Knives

    started my first flipper today.

    Just an FYI, you should do your filework after you profile the scales so you don't have to do it twice.
  12. Chuck Gedraitis Knives

    Blade Show "INCOMING"

    Nice work Peter, looking forward to hanging out.
  13. Chuck Gedraitis Knives

    Chuck Gedraitis 2014 blade show knives

    Good Evening, Here is a link to a slide show with all the knives I will have at the 2014 blade show, table 5-E. Thank you for looking, Chuck
  14. Chuck Gedraitis Knives

    Is brass outdated?

    "Brass has no class and wood is no good"- Wayne Valachovic ABS MS
  15. Chuck Gedraitis Knives

    Knife Shows

    The point of going to a knife show is exposure, to put a face to the name on the forums, allow many more people to handle your work and to make money!! If your happy making 10 knives a year that's great, but it will not be cost effective to add more shows. If you plan on doing 3-5 shows a year...
  16. Chuck Gedraitis Knives

    scratches on the face of the guard

    I know that Don Hanson will wrap a piece of sand paper around a razor blade so he can get right in tight to the seam of the guard/blade.
  17. Chuck Gedraitis Knives

    Pattern making- layout tips Post yours here

    Just photo copy the pattern if you plan on making more, cut it out and glue it to your steel. I have used a glue stick with good results.
  18. Chuck Gedraitis Knives

    Wanting to convert B111
  19. Chuck Gedraitis Knives

    A pair of gents size folders

    Here's a couple of gents folders I just finished up. The small one has a 1-7/8in damascus blade with textured Ti bolsters and the larger has a 2-1/8in CPM154 blade with mosaic damascus bolsters. Both have stabilized curly Koa scales. Thanks for looking, Chuck