Search results

FURTHER SALE, REDUCED PRICING I am closing my forge supplies business and have some remaining supplies that I am selling at reduced prices. I am further reducing the prices of my remaining inventory. These reduced prices are near 50% lower than previously available here or other places...

I am closing my forge supplies business and have some remaining supplies that I am selling at reduced prices: 1" X 24" Inswool down from $9.00 per foot to $6.00 per foot. Metrikote down from $20.00 per pint to $15.00 per pint. 1/4" NPT Needle Valves down from $15.00 to $10.00 each VFD Wiring...

Check out the Build a Gas Forge and the Ribbon Burner attachments on the Forge Supplies page at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you. About $100.00 plus the hose, regulator and burner using a 20# Propane tank. Let me know how I can help you

You should be sure and get a NIMA 4X compliant VFD. That is dust proof to prevent the metal grindings from being drawn in and ruining the VFD, such as the KBAC 27D. Likewise the motor should be TEFC (Totally Enclosed Fan Cooled). Check out the motors and VFDs on my web-site. Let me know if I...

Look at the DVDs page for getting the DVD at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you.

Check out the video on the grinders page then look at the DVDs page for getting the DVD at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you. You can build Moe's Grinder for about $1,000,00 depending on your scrap pile. Angle iron and flat bar stock.

A properly built Propane forge will out perform almost a pre-built forges. Check out the Build a Gas Forge and the Ribbon Burner attachments on the Forge Supplies page at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you. About $100.00 plus the hose, regulator and burner using...

I just got an e-mail from Stabber (Ricky) that Indian George (George Rebello) recently died. IG was quite active here several years ago and hosted the "Meet Wayne Coe Hammer-in" at his home in New Bedford, Mas. He was a great guy and a real dog lover. He has several knives shown in the...

It works well with beef brisket!

Now, I'll bet you wonder why you waited so long. Your recovery sounds like mine from the "direct anterior" surgery. I didn't even have to go to PT. Just did the exercises alone at home.

Doyle, if you will notice I post about the videos as well as information about building gas forges, as well as other matters where I think that I can provide information and help to blacksmiths and bladesmiths. I am careful not to post anything that I don't know about. If you are a...

Check out the video on the grinders page then look at the DVDs page for getting the DVD at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you.

Check out the Build a Gas Forge and the Ribbon Burner attachments on the Forge Supplies page at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you. About $100.00 plus the hose, regulator and burner using a 20# Propane tank.

Check out the video on the grinders page then look at the DVDs page for getting the DVD at www.WayneCoeArtistBlacksmith.com. If you can't view it there check out https://www.youtube.com/watch?v=sSssMBqcSrQ&t=30s for the video. Let me know if I can help you.

Check out the pages on www.WayneCoeArtistBlacksmith.com. Or better, just e-mail me. waynecoe@highland.net Let me know if I can help you.

you will have to get the hub and disks directly from Rod. (nielsendisc@gmail.com) I can supply you with the 1 hp 1800rpm TEFC cast aluminum motor for $350.25. The VFD with NIMA 4X enclosure for $359.12 The Fwd/Rev switch for $35.00 A wiring kit with an 8' molded power cord, 2' of 4 conductor...

you can get the hub and disks directly from Rod. (nielsendisc@gmail.com) I can supply you with the 1 hp 1800rpm TEFC cast aluminum motor for $350.25. The VFD with NIMA 4X enclosure for $359.12 The Fwd/Rev switch for $35.00 A wiring kit with an 8' molded power cord, 2' of 4 conductor cable for...

Yes I did . Now I control my drill press, disk grinder and mill/drill off the one VFD.

Check out the Build a Gas Forge and the Ribbon Burner attachments on the Forge Supplies page at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you. About $100.00 plus the hose, regulator and burner using a 20# Propane tank. Also consider using a Ribbon Burner for more even heat and...

I replaced the motor on mine with a 1 hp 3 phase motor and added a KBAC 24D VFD with the fwd/rev switch. Now I not only can tap and back out I have the added advantage of infinite speed control with the turn of a dial. Once the tap starts cutting threads the drill press will self feed. I also...