Search results

Very small friction folder, 14c28n and carbon fiber. Titanium pins. More or less 2" sharp, for more or less 4" open and a bit less than 1" high :D.

Thank you :D

A small balisong, 14C28N, 1050°c hardened, 190°c oil tempering. Ta6V4 (handle, tang pins, latch, hidden latch pivot), Carbon fiber spacer. Everything is beadblasted and that is build on CC bearing. The latch is as always a "friction" latch. That one is on teflon washer.

A titanium straight razor, 135Cr3, oil hardened, flash tempering , T40 Sclae an ta6v4 spacer and pins. Honing 1000 diamond stone 3000 natural chinese BBW Coticule French purple slate Gray slate leather

A small fixed blade for my Brother in law (a congratulation for his sergeant title :)) 14C28N bead blasted, carbon fiber, titanium pins. 110G with sheath. 9cm sharp for more or less 20 cm long. Full flat grind 3mm to the back and 9mm to the thickest.

A frame back friction folder with spyderhole. Titanium frame back and handle. 90MCV8 blade with differential hardening. 8.5 cm sharp for more or less 18 cm long.

Balisong TA6V4, 4,5 " de sharp , 15N20 blade (more or less 1075 + Nickel) friction Tlatch. Ti tang pins CC Bearing. 160G.

14C28N beadblasted T40 frame back. Mosaic pins, rosewood for the handle scale.

Thank you my friend :D

3", 90MCV8, Ta6v4 tang pins, spacer and handle, beadblasted, and heat anodized.

Devil Mainz Gladius 40 cm long 24 cm sharp blade 25 cm) 5mm thick 02 , 300 mm wheel hollow grind. Devil ABS guard and Red and Black Devil Kirinite. Titanium (TA6V4) pins.

A small folding kiridashi, niolox and carbon fiber. 6 cm sharp for more or less 15 cm long. Brass pin. 20g

Thank you Mike :D

The third one with spyderhole. 5 cm sharp, 16 cm long, niolox and righter chisel :D

Another kiridashi with spyderhole. Niolox and titanium, 5 cm sharp , righter chisel

Folding Kiridashi. Niolox 3mm, Bead Blasted, Carbone Fiber Titanium clip and spacer 5cm sharp for more or less 16 cm long.

O2 tool steel, T40 titanium for the frame back, 16 stainless screw M2. Carbon fiber scale. 12 cm sharp, 23 cm long, 13mm to the thickest spot. Spyderhole licenced by spyderco, (just for the design and the pleasure to make a knife with spyderhole :D

Spyderhole licensed by Spyderco. X15TN, GR2 titanium for the scale and frameback.Carbon fiber. 7 cm sharp (more or less for more or les 15 cm long. 7mm thick to the back. The main idea is to have a thick back to put the thumb during strong cut without pain. The CF scale are made to be well in...

A small balisong, 7,5 cm sharp 18,5 cm long 10 cm closed 90MCV8 (O2) differential oil hardening, flash tempering, beadblasted and anodized. CC bearing, carbon fiber spacer and Ta6V4 tang pins.

A double tongue (bifide) Suminagashi white paper steel. more or less 7/8, spyderhole licenced by spyderco. Beadblasted, ebony and bone for the scale.