Search results

Very thin and small beadblasted sharp thing (niolox steelà

Titanium and niolox friction folder. Ta6v4 , 9cm sharp, thin and sharp hollow grind :D

Do a flat grind before to begin to work on the hollow grind. It will be easier to make your hollow grind to the highness you want. And it will be easier to center you grind after to have centered it with the flat grind :D Begin to make shoulderless it's easier. Try to have the thinnest possible...

6/8 , titanium, 115w8 blade with differential hardening, double tempering to 200°c, Near wedge grind (300mm wheel). Titanium spacer, stainless screw and nylon washer. Toxified and anodised. 3 various univers That one has been done with droid reformed steel (X15Tn for the blade and...

Thank you :D

6/8, 90MCV8, translucide G10, near wedge, titanium spacer

6/8, 90MCV8 (O2) titanium scale (T40), T&6v4 spacer, near wedge, round back to change :D

14 cm long closed , 24 cm long open, 8,5 cm sharp. 115w8 differential hardening. CC bearing. ta6v4 tang pins, latch and spacer Friction latch

Some paracord in the two hole and around the neck :D. Or simply in a pocket with a small paracord lace around somewhear on the pant :D

Thank you very much :D

Linhéraptor 2. O2 tool steel, oil hardened 820°c, 180°c tempering, Near wedge with a 200mm contact wheel. Oak scale. I did three scale for that one. It's a cursed straight razor.... Spyderhole licenced by Spyderco :) Cleaning of a straight razor i did some time and the user did a...

thank you :D

that balisong have had new caged bearing, new pivot a bit longer, new stainless steel spacer, new anodization and an abs sheath.

Thank you very much :D

A second compact balisong, O2 with differential hardeningd. Gr5 titanium -handle, latch, clip, tang pins, latch pin,spacer. Stainless screw and ball bearing. More or less 3" blade, 1" high, 3mm blade thick and more or less 8" long open.

Bifide titanium scale and spacer, niolox 8/8 near wedge smile. Spyderhole licensed by Spyderco.

A black Bifide (double tongue) niolox , 8/8 near wedge, titanium spacer, carbon fiber :). Spyderhole licenced by spyderco

Marco posted a draw on frenchbaliconnexion about a prodigy live blade. He asked me if i could made all the part of the work after the waterjet cut. He did it cut by a firm in belgium for two blade in xc75. The waterjet cut wasn't really clean, i cleaned everything, grinded the blade, heat treat...

I did a small low profil clip in titanium. Toxified (differently from the handle for the look) :D. It's on the bite handle and you can put the clip on each side :D

Thank you very much :D