Search results

I use on omote a 100mm wheel and on ura side 150 or 200 mm wheel. But on omote you can use something a bit smaller to have a bit more angle on the edge.

A kami Scrap (kamisori mean razor in japanese). the blade is a niolox scrap without any shape. 6.7mm thick. The scale are ta6v4 , they was a failed about balisong handle. The spacer is a scrap of niolox. After the first quench, the edge don't hold, second quench, same thing. I honed it more...

That is a kamisori done to use scrap piece. A piece of niolox, i succeed to find the place to make the blade in it. Two scale of TA6V4 very thing (scrap of folder handle scale). A balisong spacer for the spacer :D It's a right kamisori. honing 500-800-1000-3000-6000- 8-10K - 10-12K - 15K+ -...

The idea, was to make a reverses tanto, with hamon and toxified handle. I had a tanto blade on the workbench i thought to be in 115w8... i did my reversed tanto with that blade; heat treated it.... no hamon. I tested the blade, it was in niolox..... Re heatreat.... And because the blade was...

A friend wanted a cardo no kami easy to carry in the pen pocket and asked me for something with a pen clip folded in the tang. 115w8 6.2 cm sharp, 10 cm long to the tail closed. The clip is over tempered to have something near a spring. Wild hamon and Ta6V4 for handle and false piece.

As always, that is rough picture, free hand take during discussion, hit by people, that is in live :D. The pict are worst than usual :D Tony Lopes Torpen Leveque Tourangelle Richard Ciacherra PH...

The black double tongue (bifide) is exactly the same design than the previous one :D. Niolox, 8/8, 7-8 cm sharp, carbon fibre scale, and anodised ti for the spacer. Spyderhole licenced by spyderco :D The two double tongue Spyderholed family

2 kogatana, 115w8 with differential hardening and niolox for the second one :D Kiridashi done with a scrap piece during the heat of the oven :D more or less 3 cm sharp for more or less 8 cm long :D, same heat treatment than my straight razor A test in a scrap piece of...

Niolox, M3 mokume Black Lava and Copper. (it's really something i won't use anymore....it's too breakable even if the result is really nice). 8/8 blade, near wedge, bronze phosphore washer, stainless screw, titanium spacer. Spyderhole licenced by Spyderco

You will find all the answer to your question here http://straightrazorplace.com/srpwiki/images/1/17/Help_Files_Permanent_Archive_Great_Straight_Info_Razor_Central_Manual.pdf That is indeed the back thickness and the edge which give the angle on the stone. That is function of the highness of...

A small 6/8 O1 tool steel blade, oil hardened and double tempering to 175°c. Oak scale treated with lin oil. Quarter hollow with 200 mm wheel, BP washer, rosewood wedge, and brass pins and washer. (i bite a bit with the grinder the washer to have a heel clean. What a shame.). The...

Thank you for the kind word :D

As i have scrap, and because my moral is not to the top, in order to feel better, i did some kiridashi and kogatana 10 kiris in 115w8 oil hardening 810°c (keep to the température 10mn). Double tempering to 175°c during 45mn. 6 hollow grind with a 200 mm wheel, 4 with hollow grind with that a...

A big bali 115w8 blade, differential hardening, T40 liner, toxic green g10 scale, Ta6V4 heat anodized spacer. Ta6V4 latch, 100c6 tang pins and latch pins. 13 cm for the blade and 10,5 cm sharp. 27 cm open, 16 cm closed. The latch is a bit special, there is a retention ball (1/16" of hardened...

10 cm sharp, differential hardening on 115w8, 2.3 cm high, 26 cm long Ta6V4 handle and spacer, checkered safe handle in order to know what handle it is. The pivot don't go through the full handle. They are counterbored in the handle to the 1/2 of the thickness and the screw tighten...

I bought the set of three Welsh stone in 152*76 mm. From left to the right Dragon Tongue, Purple LLYN Melynllyn , Dark Green Gray Slate I took everything on that address http://stores.ebay.fr/greensharpeningstoneshop. The price is good, that is the shipping cost which is a bit...

Another classical near wedge straight, with 6/8 spanish , 115w8 blade, oil hardened, 170°c tempering x2. I wanted to do a quarter hollow grind but don't grind it with the right wheel size.... The differential hardening is not wanted at all but when i discovered it under the belt, i etched it...

Thank you :D

A small classical 5/8 barber notch in 115w8. carbon fiber for the spacer and Toxic Green G10 for the scale. 7" sharp, that one is between the near wedge and the quarter hollow gring. 15.3 cm closed. The pivot screw go through the blade and is screwed in a piece to the other side of the scale :D...

The Quetzalcoaltus : Quetzal will be easier to memorize (it's a flying dinosaur from the pterosaurs family ). That is dinosaur in 115W8, 810°c hardening, two tempering to 170°c. 8 cm sharp, for a 6/8, 5,5 mm thick to the back. The Spyderhole licensed by Spyderco is more for the design that...