Search results

Thank you :D

Classical stainless handled Cardo No Kami 12 cm to the tail. 17,2 cm long, 7 cm sharp, 2 cm high, 6mm thick 1 cm to the pivot 90MCV8 blade, differential hardening un etched. (the hamon will show his true nature during the blade life)

A small scrap Dashi to use a scrap after the cut of a Cardo No Kami Blade 90MCV8 oil hardening, 200°c tempering , sharp 2,1 cm, thickness 2,6mm, long 5,7 cm.

Thank you :D

Another Cardo No kami . F olded Stainless steel handle , 90MCV8 blade 2,6mm thick. Oil hardening 200°c tempering. 12,1cm closed to the tail, 2 cm high, thickness=6mm and 9 mm to the screw 17,6cm long, 7,5 cm sharp

My hope is to keep it quite clean :).

After all that time some pict of my new workshop are normal :D My Big Boys tool 2 drill press, a grinder, a wood dust collector. The home made gaz forge Speed controler and the place for the belt, there will be some other point to suspend the belt :D My Belt saw that i pimped a...

thank you for the kind word :D

Thank you :D

My new workshop is completed, eveything is ok, cabled, and even cleaned:roflmao: In order to fest that, i completed a cardo no kami began just after christmas Folder stainless steel handle as on the old Higonokami. I textured the handle as KOF did ( a french knifemaker). I heated the...

Thank you very much for the kind word :D

Thank you very much :D

The first thing out for my "not workshop" for 2012. The idea was to do a frame back, with ti side. 90MCV8 (02) blade, TA6V4 plate on each side, PCB piece for the handle. I'm really happy with the result, The shaving is quite soft, some leather work and it will really great :D I named...

It seem to be a Morpho with a different blade and a belly handle :D http://www.youtube.com/watch?v=LNc3WcthK10&feature=youtu.be The price seem to be not bad at all. 440c blade by boker are generaly really well heat treated...

The last balisong for 2011, always without workshop :D red G10, xc75 blade differential hardening. Righter chisel grind, 12 cm closed, 20 cm open, 8 cm sharp, 1 cm thick :D

Thank you :D

I don't have my workshop now, but with the various tool and machine in various spot, i played a bit during christmas holydays. Small fixed blade with the Picko design (a design done for the Czen Challenge 2011). Czen is a french forum, and every guy whose wanted could do a knife on that...

Thank you :D

Something a bit Rock N Roll, 18.2 cm open, 8 cm sharp, 6mm thick, 100MnCrW4 (O1) blade from 3.5mm thick, 11.6 cm closed to the tail. BP washer. Oil differential hardenig, ss handle :D

The last thing i did in 2011 even without workshop (new house :)). 10,6cm long, 1 cm high, 3 cm sharp. XC75 differential hardening. Flash tempering (a bit high (purple) to the tip and gold everywhere else........) Zero grind righter chisel.