Search results

The label on the vfd in this photo says 400v 3 phase http://knifedogs.com/attachment.php?attachmentid=45897&d=1390922440 I'd bet that this will not work on standard residential power. You don't have 400v 3 phase That's why it's cheap.

Buy a new one at HD and keep the sales slip, return the broken one a week later for the refund. I've just read some reviews, they all broke in the same way I bet the old ones were a solid casting. It really ticks me off when these companies buy up all the manufactures with good...

Here, try this

I still can't read the photo, it's big enough, but blurry Let's see a good photo Let's see your diagram

connect the black wire - live - from the 110 to P1 Put the switch in the middle it interrupts power

This X pattern is the key to the T5 T8 swap However this diagram is for a DC motor so ignore the motor and power supply labels This switch will only change direction, you still need a power switch You will have to attach little wires to form the X A to F and C to D Make A and F T5...

It says interchange leads T5 and T8 to reverse so pick your voltage, 220 or 110 Then let's see a better photo of the diagram, I can't tell one number from the other But see if you can figure it out from this This X pattern is the key However this diagram is for a DC motor so ignore the...

If noise is an issue, you can always put quick disconnects fittings on long hose and put your power pack outside.

No need to break taps. If you run the slowest rpm possible, it goes slower and seems more controlled The clutch is adjustable. Start low and go higher until it just turns all the way through your material. Staring high and going low - sure you may break some taps.

Sealing it like that is tricky There is a long thread on BF about a fellow with a fungal infection and the source may have been his resp. You need to dissemble clean and dry it after use. a cloth bag may be better to allow airflow while repelling dust. How often to change ? You will feel a...

:25 "You don't forsake speed for quality" Backwards? I think you mean to use that the other way around That means you produces crap at a high speed. You probably mean "you don't forsake quality for speed" - which matches the rest of the text you use after.

Once it's all lined up, try more belt tension too.

All competition cutters are required to have that sort of thong hole. I don't know if Bussee would go after them or not, they have to balance protection with customer perception.

I'd do some scrap testing on those sizes first. If that's not working for you, you can get decimal inch sized and dowel pin reamers in smaller increments.

If you ask the police as suggested, they will not really know, but they will never admit that. They will just tell you "No" Ask a judge, or lawyer, or agency. The Canadian law is worded the same as the lines you have listed above, but someone has posted a letter of ruling from the Canada...

Kant twist clamps are fantastic, you don't get that twisting action like normal screw C clamps do. They are not as fast and as cheap as the normal spring clamps for glue up though.

Great video quality, Lighting, video, audio quality all improved by leaps and bounds.

There is video of Knife Maker Tim Hancock, Hosted by Travis Wuertz hammer in showing how he uses the disc in the plunge. Video quality is crap, hand-held shaky camera, audio is hard to hear and half the people there feel they have to talk over the presenter, but the info is gold. I'd...

Do you think that the wheel go harder over time? I've got an old wheel too and I'm not sure it hardened as it aged, but I think it may have.

The Milwaulkee saw is better designed, better built, greater throat depth, you can buy accessories for it like the Swag Off Road table, and you can get repair parts too. But it's also 4x's the price. The new Milwaulee saws are made in China now too, so you can forget the buy American...