Search results

UPDATE: we are good to go with the group buy. Yay! :-) Its great to see this come together.@Please email me for more information. Thanks

Others might be interested since I have been asked. The Beaumont Metalworks workrest does work with the Nielsen Disc system. This would be an incredibly versatile pairing. For details, see threads in the Beaumont sub forum. There are quite a few and one shows the workrest with the...

Sweet.

3 more individuals needed to make 10. Motivate your buddies.

Which work rest did you get, Beaumont?

Update: pricing forwarded to 17 individuals. We are half way to the 10 needed to make to group buy happen.

Everything needs to be very squared up well with sharp corners for sure. This is where a disc grinder will really shine.

I have chosen to not run in the 2x mode. My motor is a 1750 rpm and I have a 6" drive wheel. I chosen a certain pulley ratio so that I woul get the belt speed that I felt was high enough for the belts that require this. Mine runs all out at about 5300 sfm. I would recommend designing around a...

Kb makes a vfd for 3 hp. Model 29 (1p) #10001. Max output is 9.0 amps. Reverse switch is #9480 and on off switch is # 9523. I bought this setup for my Baldor 3hp and everything runs well. The plus is that you will also be able to run less than 3hp motors as well. Hope this helps.

That tool rest looks stout. Would have plenty of room. Great build.

Here's a video of Wayne Coe and his variable speed disc grinder that uses the Nielsen disc system: http://m.youtube.com/watch?v=Z7nVR_B5zPg

I thought I would update folks on the interest. I have emailed 12 individuals pricing so we are on our way. Thanks Can read further here: http://www.bladeforums.com/forums/showthread.php/1093681-Nielsen-disc-grinder-interchangeable-system-group-buy

Here a few other links regarding this system. http://www.caffreyknives.net/RodsDisc.html

Since there has been very positive feedback on the Nielsen interchangeable disk system, I thought I would put together a group buy. I have spoken with Wayne Coe about this and these are the details. http://www.nielsendesigndiscgrinder.com/Welcome.html The deal is as follows:If there is a...

Super nice and looks very comfy. Could you ht the next batch for increased durability?

R62rs seems to be the bearing number with dimensions of 3/8x7/8x9/32

Shoot. Could you measure the diameter of the axle and the OD as well? I would greatly appreciate it. Thanks

I'm messing around with some ideas and besides buying a small wheel and tearing it up I wanted to buy the bearings elsewhere. I'd like to get some very good quality bearings to play around with. Does anyone know the bearing number? I assume that the small wheels assemblies that can be...

Lenox m42 blades are upper tough. Works well. There are 5 different tooth counts some alternating that are quite effective.

This Craftsman vise has gotten good reviews and seems to be a very similar design for those familiar with Wilton's. http://garagejournal.com/forum/showthread.php?t=117487