Search results
-
Please help me out. I can't find my way.
Frank, PM me the details of the problems you are having? -John- John Barker
- Post #3
- Forum: Support Forum- KnifeDogs or Computer Tech
-
Janik Military Build WIP
That came out great! -John- John Barker
- Post #25
- Forum: Military Knives Forum
-
I thought this was cool
Lots of good stuff on that sight. -John- John Barker
- Post #4
- Forum: Knife Maker Shop Talk
-
seven inches of shiny stabby steel!
I just finished up this Hokkaido. The blade is just a hair over 7" long. The blade is CTS-XHP with a 600 grit hand satin finish. The tip is convexed to a zero edge and finished to 5 microns. The scales are black linen micarta with red liners. Rockwell hardness is 61. Overall length is...- John Barker
- Thread
- Replies: 8
- Forum: Custom Knife Forum
-
I thought this was cool
Let's you calculate spindle speed and feed rates. http://www.custompartnet.com/calculator/milling-speed-and-feed -John- John Barker
- Thread
- Replies: 3
- Forum: Knife Maker Shop Talk
-
The polls are open !!!!
Cast your votes Dogs! -John- John Barker
- Post #14
- Forum: Knife Dogs Main Forum
-
Fitting Bolsters?
I flatten my blade on the platen first, then I flatten to inside of the bolster. You can do this on a disc grinder or granite slab. Then, I drill 3 holes in a triangle patten in the tang for my pins. I then countersink the holes just enough to remove any burr. Then I clamp one side of the...- John Barker
- Post #5
- Forum: Knife Maker Shop Talk
-
Finishing Micarta handles
I finish mine at either 320 or 400 grit just depending on how grippy I want it. Then I run it under my buffer loaded with 600 grit greaseless compound for a second or two. Then I wipe it down with a cotton cloth and some WD-40. -John- John Barker
- Post #9
- Forum: Knife Maker Shop Talk
-
The polls are open !!!!
It's got it's own section. What more do you want? -John- John Barker
- Post #6
- Forum: Knife Dogs Main Forum
-
-
-
-
-
New member from Blighty
Welcome to KD! Great knife! -John- John Barker
- Post #8
- Forum: Introduction Page
-
-
-
-
-
-