Search results

  1. v-6

    How thick do you measure your center marks.

    Gauge gotpm1gotpm1
  2. v-6

    Ceramic platten

    thanks Rusty. have a nice Christmas vern :weinerdog1
  3. v-6

    Ceramic platten

    Tell me how i should i change the Ceramic platen on my kmg grinder. i chipped it and it leaves a high spot in the blade. do i heat it with a torch, heatgun or what. :bud: thanks vern
  4. v-6

    Waterjet at work!

    This is amazing , I had Joe Todey do some waterjet work yesterday . He made me 20 copper guards, 100 steel guards and 20 knife blanks. This Guy is and machine are amazing. This co. is priced so far that if you want something done you need to give Joe a email and see how mush it cost. you...
  5. v-6

    Grinding problem

    well try not pushing on it so hard. i assume it must be a finer grit belt or may be wore out. vern :bud:
  6. v-6

    more steel

    well i can buy more steel now, the wife said I could if iI got her drier fixed. so just call me the maytag repair man. all done now more steel. vern goodjob1
  7. v-6

    Help! Hollow Grinding!

    mike , look at this and watch his hands real close. http://www.knifedogs.com/showthread.php?t=297 vern
  8. v-6

    2x72' grinder cleveland

    http://cleveland.craigslist.org/tls/1464506329.html
  9. v-6

    Can't get avatar to upload

    download this ,it free http://photobucket.com/ or just click on the picture you want to use . then save it as a .jpg file. vern avatar need to be small
  10. v-6

    I Have a 40+ lbs Box of G-11 to Give Away, interested?

    Hey, i love green. thanks for the chance vern :bud:take it 1
  11. v-6

    Well i'm making

    well i'm making a Santoku style knife for the wife and am needing some help from one of you pro's that do kitchen knives. I need to know how you do the notch's or relief groove's so food does not stick. I'm at that point and don't know how and what equipment to use. Any help would be...
  12. v-6

    Wood end grain

    I could be wrong , but it could be pushing to hard on the sand paper, or you could be using a belt that you used on metal , which its a no no. i use new sand paper like its free
  13. v-6

    is 800 grit

    Thanks guys vern ps: Dave , you'll have to come down to ottumwa, and make a knife with me .
  14. v-6

    is 800 grit

    is 800 grit far enough to go to the buffer to make a mirror finish ? Would you use a cork belt on it or not? vern 2guns
  15. v-6

    sanding paper

    Where do you guys buy your ao sandpaper in sheets or rolls ? vern
  16. v-6

    3/32 1095

    Raymond every thing worked out fine . 2thumbs thaaaaaaaaank you vern
  17. v-6

    3/32 1095

    that is what i did ht and then i was going to grind. thanks Raymond vern urock1
  18. v-6

    3/32 1095

    I have been doing 1095 3/16 for about 2 years and only had 2 or 3 blades bow. now i'm trying 1095 3/32 and they bow during cool down this is after i bring them out of quench. please someone tell me how do you keep it from doing this. this is what i been doing. bring to 1500, quench in...
  19. v-6

    Just right for the season

    The trick is start with about 2 gal. oil and then add. heat 3 and take out 1 gal and add back so you dont have to much. i started a test with water a few years back to see just how much oil it would take for a 14# bird and this is what we come up with. put the drained bird in real slow , not...
  20. v-6

    Just right for the season

    Just got done deep frying a 14 # turkey and a 6 # chicken , now with the smell that's left in my shop i'll want to eat for a week. vern cry me a river 1
Back
Top