Search results

Thanks a bunch guys. Tom, it is always my pleasure to have you over to the shop. We certainly have to hit the high country streams as soon as run off is over. Take care. Wayno __________________ Best regards and God Bless, Wayne Full Time Maker Member of the Professional...

Heck ya James - pics or it didn't happen! :rolleyes:

Fletch - You need to try it. IMHO...our present day bolsters are mainly for show anyway. In the days of old when quality steel was hard to come by, possibly the knives of those days needed "bolstering" due to thinner stock (again, reserving the rare steel of the day). The bolster then...

Thanks a bunch guys. I truly appreciate the kind words. You know what? I posted the same thread over at the "other" forum this morning right after I posted this one here on KD. It's been all day and not one comment. I 'spose I'm not one of the cool kids in their click. Not that I live for...

Here is a new one to fill a special order...hope you like it. SPECS OAL: 8 5/8” Blade: 3 3/8” X 1 3/8" wide; Flat Grind; 59RC; 3/16” thick towards front of blade; tapered tang; satin finish Blade Steel: 1095 High Carbon Steel, differentially heat treated File Work: N/A Handle...

DOUBLE DITTO on what Murph and Dozier said. ;)2thumbs Great job my friend. __________________ Best regards, Wayne Full Time Maker Member of the Professional Knifemakers Association www.jarrettknives.com Are you a Dawg yet? Be sure to check out the new Jarrett Knives Forum...

Thank you LX Emergency! And a timely bump as well. Take care everyone and God Bless. __________________ Best regards, Wayne Full Time Maker Member of the Professional Knifemakers Association www.jarrettknives.com Are you a Dawg yet? Be sure to check out the new Jarrett...

SOLD and shipping to Australia Damascus and Sambar Stag Bird & Trout Nice deep hollow grind for a wicked edge! This stag has great character! Tapered tang for minor weight reduction but mostly - eye candy! Damascus or not - Keep it cleaned and oiled after use in the...

James, VERY nice package my friend!!! It's good to see you over with us Dogs! Take care and God Bless __________________ Best regards, Wayne Full Time Maker Member of the Professional Knifemakers Association www.jarrettknives.com Are you a Dawg yet? Be sure to check out...

Thanks guys, much appreciated. And James, it would be great to meet you and any other corgi1 Dawgs :bud: that come to the show. __________________ Best regards, Wayne Full Time Maker Member of the Professional Knifemakers Association www.jarrettknives.com Are you a Dawg...

I've made a few choppers with it and find that leaving it grippy is the way to go, no other finish required. I found that contact cement is the best adhesive for this material. Once attached, it holds like a beast. __________________ Best regards, Wayne Full Time Maker Member of...

Springtime in the Colorado Rockies - We live at 8,500ft elevation and this is what we awoke to on Saturday. That's a little over 30". Our property is zoned "forestry" and when you live in fear of forest fires during the summer, spring moisture is welcome in any fashion...

Thank you gentlemen, very kind of you to say. __________________ Best regards, Wayne Full Time Maker Member of the Professional Knifemakers Association www.jarrettknives.com Are you a Dawg yet? Be sure to check out the new Jarrett Knives Forum Stop by my table at The A.G. Russell Knife Event

Very cool Harry, shake that young mans hand for me. Our boys are put on this Earth to surprise their Papa's - that's for sure! __________________ Best regards, Wayne Full Time Maker Member of the Professional Knifemakers Association www.jarrettknives.com Are you a Dawg yet? Be...

"The Scythe" SPECS OAL: 9 1/4” Blade: 4 1/4” Flat Grind; slight recurve; 59RC; 5/32” thick at ricasso; tapered tang Blade Steel: Twist Damascus 1080 15N20 Handle: Blood Red Horistes Burl from Australia Bolsters: M3 Mokume Pins: 416 Stainless Steel That is not dust on the...

A few more "Twisted Cripple EDC's” (TC'EDC's) Available Did you miss out last time? This is a limited run of only 100 pieces and we're 1/3 of the way there. This batch is SOLD OUT If you would like to reserve one of the next batch please drop me a note at info@jarrettknives.com Due to...

Archer Moon;65220 - Thanks for the kind words. If wasn't easy to find mammoth ivory that had dark AND light coloring to match up with the grain of the wood (to make the color flow through the whole knife) but I finally found some in my box of raw ivory. If you look at the picture of the...

OAL: 8 1/2” Blade: 3 3/4” Flat Grind; 59RC; 3/16” thick at forward portion of the blade; tapered tang Blade Steel: 1095 High Carbon Steel, differentially heat treated with satin finish File Work: N/A Handle: Highly figured Ironwood with a .002" stainless steel spacer Bolsters: Mammoth Ivory...

Sweet!!!!! Great work my friend! 2thumbs __________________ Best regards, Wayne Full Time Maker Member of the Professional Knifemakers Association www.jarrettknives.com Are you a Dawg yet? Be sure to check out the new Jarrett Knives Forum Stop by my table at The A.G...

Mark, It's not too bad. No more fragile than mammoth tooth really. It would be damaged if the knife were dropped on a concrete floor or something similar or if it took a sharp impact but if you care for the knife like you should, it will be fine. __________________ Best regards, Wayne...