Search results

Gday Alistair, A lot of the MOP scales i have also have the cracks and dull sections on the back side. I just super glue the cracks, sand flat on wet & dry, fill voids with sanding dust and super glue. With the black i would do the same but because it is usually very thin I would glue to a...

They obviously aint too fussy, I got one too:D

A typical class act from Keith, felt pretty good in the hand too;)

Nice job mate, leave it brushed though

Thanks fella's

Gday Bruce, Thanks for such in depth WIP's. 2thumbs Who sells the carbide file guide???? I have just about worn out my normal one doing the same thing!!! Cheers Bruce

Welcome aboard John, be careful, ya can get stuck on here for hours. Cheers Bruce

Tattoo's...... so moving pictures all year round:D Congrats Cheers Bruce

For user knives I normally go to 600g then etch, then clean up with steel wool and a metal polish. I make gaurds an interference fit onto the tang, however in your case if you were to use JB weld you wont have the cleanup issue associated with solder. Cheers Bruce

Hey mate, Does that remind ya of a knife and story someone had at Keiths Hammer in:eek:

Maybe ask now to name which Eucalyptus it is. There has to be over 100 of them????

Gotta agree with IG and Dave on this one. Thats just took all the fun outta motorcycling. Cheers Bruce

I started making with a Radius Master 4 yrs ago now and would not part with it even though I would now do 70% of my grinding on my variable speed KMG. The ability to flick it on its side, clip on the table and use the 3 small wheels, & the slack belt area is a huge plus. You can get 90% of the...

Damn, more money. I got a heap of those shields but didnt see the templates before.

Gday Mitch, Welcome aboard mate, starting to get the Aussie numbers up now2thumbs

Yes, go to Ed Caffrey's site and check out the Caffrey Platen. Quick, easy & brilliant for convex grinding.

Hey mate, Glad to see another Aussie joining in

Welcome mate, and glad to hear ya coming over to the custom sidecool 1

Gday all, Here is 4 new ones that i have managed to get finished for our Adelaide Custom Knifeshow this weekend. The 3 are from the top: 9" W2 chopper with stainless gaurd and ringed Gidgee handle which i still need to mark and do a kydex sheath for. The middle one is 5.75" of 1075 I...

Because grinding wheel fragments & metal dust & machine oil becomes grinding paste and gets into places on mills where it is not wanted!!!!!!!