Search results

If your washer is .020" thick then your detent ball should only be .018" sticking out of the liner. Your blade could have sides that are not parallel to each other and your liner and handle halves may not be perfectly flat.

I went back and looked at the pivot screw and I decided to countersink it more and I turned the face of the screw down some. Looks better. Will try to post new pic today.

My mark has name and city because I found out people will find it easier too track down the maker of a knife. I have had many great conversations with some who bought my knives and some who were looking to buy. And they found me because of the city in the mark.

You will have plenty of torque. I have built my own grinders for 32 years. I have one in my shop that is a half horse with a DC motor and controller. Even at low RPM's it will rip your arm off if you get it caught. I've heard this bull about grinding with 3 or 4 horse power motors is the...

The screw is countersunk some. Sometimes I leave them a little high because it gives the thumb something to grip when pulling out of the pocket.

The blade is Norris damascus in ladder pattern. 3 9/16" long and flat ground. Ti bolsters with G10 handles. Milled titanium for clip.

Hey Josh, that is real nice work. The scroll on the sheath would go well with the wire inlay work you do. Good work.

Blade is D2 at 3 15/16" long Bolsters are Chad Nichols damascus G10 handles and handle spacer Milled Ti pocket clip Anodized liners Teflon washers

No snow yet. Just a lot of liquid falling.

A very good design because the blade design fits the handle. The tanto style is hard to get a good handle to go with it.

Thank you for your very kind gesture.

Thanks Mike. With the Parkinson's I have my doctor has recommended that I not drive long distance by myself. It can be difficult at times just here in town. That weekend my wife had a business trip out of town so she could not drive me. I still plan on going down to Todd's place. My son...

Mark, the bolsters are mosaic damascus by Chad Nichols and was heat blued with a torch. Alex, good to hear from you. The beach is the same as always. I have retired from construction and just make knives. No more pipewelding for me.

This is the latest knife I have finished. 3 1/2" D2 blade with Nichols damascus for bolster and OD G10 handles. Ti liners and clip.

Always glad to see a new forum. Have been making knives 32 years and I have a lot of friends in the knife community. I will look forward to making new ones here.