Search results

You did a great job on that Steve we truly live in a great country.

I have a NORTH full-face air respirator to give away this is a used mask but it has been cleaned it comes with 3 filter sets; size M/L should fit most people. The place where I work is closing and we have some of these that are no longer needed. I came up with an extra large for those with...

That looks great Chris how did you like working with the G11 hard stuff isn’t it. I had the same problem with it chipping I'm using some on a blade now and what I did was glue the scales on, drill the pin holes, glued the pins in and then used my band saw and a 1/2 inch metal cutting blade and...

If you were were working with 1/8 stock how much would you grind before HT?

I made a stand out of uni-strut and tie raps.

It was from a post a few months back it helps http://knifedogs.com/showpost.php?p=78208&postcount=12 to keep an even temperature. Once the diffuser comes up to temp you can turn the heat down and just maintain the heat during the treatment. I think it works like a dutch oven it helps to keep the...

After Tempering Here are the blades after tempering; I tempered them at 400 for 2 hours twice letting them cool to the touch in-between. I skated a file across them and it didn’t bite just knocked the decarb off. I’ll take them to work with me and let the sand blaster have its way with...

Congrats Ironwolf It looks like there are a lot of good pieces in that box.

I have two cabins in remote location with a little land on each both have what I need to survive for a while. When I find some old tools or equipment I take them there and store them. I drilled a well on one and have a hand pump and storage barrels for water on the other I have a electric pump...

Thanks for the link I have most everything for a heat treating furnace with a Digital Pyrometer and K type thermocouple I'm just waiting on the bricks. I've done a little research and this is one of the methods used if you don't have a HT oven. I like to be able to do things on my own and not...

This is the forge I purchased from Three Sisters Forge at the Oregon knife show in April. I lined it with a Cerablanket HP Ceramic blanket and coated it with Plistix 900F. The burner is from Larry Zoeller zoellerforge.com it’s one of his Z Burner’s I connected it to the gas bottle using one of...

Great Job Doug I hope your friend likes his new blade.

That looks great who did the HT are the others the same design?

That looks great Doug be sure and post pictures of the sheath.

those both look very nice great design.

I have a question on the K type high temperature thermo coupler I read on another link where some folks place this inside a ss tube to help protect it do you see any harm in this also where are you going to place it in the kiln?

Great video Ernie

That looks great

Looks very nice I like the red liners what are the scales made of?

Grinder I would think at least a 1 1/2 1750 or 1800rpm I was going to suggest that you look at the posts on Blade forum but when I went to look up the links it looks like you are already reading it. I think that that would be the place to get information several people on that forum were...