Search results

The African Paduak one is sold . Thanks

These two knives were ground from 5/32 A-2 steel , they were heat treated by Peters Heat Treat to an Rc. 61 . They were flat ground with a distal taper and hand satin sanded to a 500 grit finish . Specs. are the same for both . O.A.L. is 8-3/4" Blade is 4-1/8" tip to plunge Sharpened edge is 4"...

I guess I should check in here more often . I don't seem to be getting the automatic updates for these post . Thanks Robert for sharing my work here .

I wrote Paul , he said there will be no disruption in service . All is good

Thanks dknife , I will have to put that design on my DO MORE list .:D

hi Martin , enjoy the site and welcome

got the payment Martin . I will get it shipped out tomorrow and e-mail you with a confirmation# Thanks Jack ONeill

had a request for a close up shot of the pins , so here it is .

A nice sized every day carry knife in the wharncliffe design . The blade was heat treated by Peter's heat treat to an Rc. 61 . It is A-2 , 5/32 steel ,flat ground and scotch bright satin finished , the specs. are Steel - A-2 , 5/32 O.A.L is 7 1/4" Blade is 3 1/4" with a sharpened edge at 3 "...

hello everyone , I ground this knife out of a piece of 5/32 ATS-34 steel , the blade has been ground down to .065 just a tad over 1/16" to give it flex . Paul Bos did the heat treat to an Rc. 58-59 . Specs are: O.A.L is 11" Blade is 5-1/2 " flat ground and hand sanded satin finish to a 500 grit...

Boss Dog . I hope the direction of the belt in the pics is not an indication of the direction that the grinder will run in .2thumbs :D

I don't remember if I did this or not . So to be on the safe side here I am . I am Jack ONeill , started learning how to make knives as a hobby in the early 90's . I'm still learning . We live in a nice quiet small town in southwest , Washington . A big population of 360 here in Naselle and 1200...

makes a great desk display and letter opener . I'm surprised there is no interest .

It is resting on the geode Charlie .

A Dan Graves made damascus dagger , 1095 and nickel with nickel silver fittings . The dagger is screwed together and bonded . Handle is an interior cut of mammoth ivory with tan and white color . A Geode and Mahogany wood stand . The o.a.l. is 5-5/8 inches and the blade length is 3-3/8 inches ...

Me and the wife

#210 for me on this one .

Glad to see I'm not the only one that call's you Mikey . Do you have a flat platen assembly for that new grinder ? If not you need to get one . I believe you already know where you need to improve , so get busy . Be careful on washing out your grind lines . Nice job on that handle profile .

I just looked at there web site for what I use . Tru-grit is less expensive for my use .

Now that is a score . I would find some way to make it work .