Search results

No, but my wife has a nice glow about her!:eek:

How about my cell phone. Could it put out enough radiation? It's a Samsung and I don't see a model number. Dave

Nope! I am on vacation for the next two weeks, but will go talk with my workplace Monday. I don't see anything there, but who knows!

My first thought was Radon! Don't know ID and she said low level.

All they said is it is low level

Here is the story! I loaded my pickup with scrap aluminum and took it to the scrap yard. I drove on the scale, unloaded, and drove on the scale again. When I went inside, I was asked if I was undergoing radiation treatment because I set off the radiation sensor, "both times I drove on the...

I'm a Die cast specialist working for the Toro Company. Dave

Just what I was looking for! Thanks. I work as a die cast specialist, and we throw out allot of used push pins, and think I will give them a try. Dave

What steel does everyone use for making a steel? How hard does it have to be? Thanks Dave

I have 2 hp running at 3450. I really have to push to get it to slow the RPM's on high.. I also use a 4 step pulley setup that runs quite fast on high, and quite slow on low. I like my setup. It will run slow enough to use my 400 grit cork belt, or fast enough for 36 grit.

Thanks I'm in!

Go to your local paint supply and get a little black pigment they use to mix paint. Add just a little to clear epoxy and mix well. A drop of the pigment will go a long way. Dave

I tried to get a few pics of one in process, but pics didn't turn out at all! These two of a couple drawings of the file are readable, so here they are. A little dark but ok. I tried taking pics inside, outside, with flash. without flash, but they were all horrible. The first pic, is how I...

Have a hectic week ahead, but will see what I can do. Dave

What I do is make my plunge first. I than clean my plunge with a 3/16 round file that I ground a flat on, about 1/8 wide. I polish the flat on the file, so it won't scratch. I than place the flat of the file on the flat of the blade, and give a few strokes on each plunge, and it looks great! I...

That is VERY nice! Nice Job! Dave

I don't post alot, but I find when I do several jump in with help and compliments. I do spend alot of time just lurking and learning. Great sight!!! Dave

I made this denum stock with that exact resin. If you contact him with your needs, he sells other formulas. I contacted him after I made this stock, and he had something better. Having said that, it was very nice to work with. It is very strong, and comes up with a nice shine. I wouldn't be...

I have thought of it. Could cut them out and finish them out on my belt grinder. Just figure it will take a hole lot of time. There are 21 knives on this sheet. If I don't come up with something in the next few days, thats what I'll do. Dave

How cool could that be! I think I have an old super soaker around somewhere.:D If I can get some knife sales, I'll have to check into your setup for profiling my blades. Dave