Search results

Rex, 9312 PS

Try http://www.reactivemetals.com/

I just bought a 0 to 125 volt DC supply from the folks a MPJA (www.mpja.com) it looks like it's the same supply sold by the Reactive Metal folks but was $97 instead of $227. I just received it so I haven't had a chance to do any anodizing with it but I did hook it up to a meter to see if it's...

That was my thinking as well I just couldn't find a pipe that was close enought to the right size and I didn't have the machining capability to make one.

The collar is from MSC and as you can see it's solid with a set screw they also make them split and two piece but the only one I could get in the size I needed was a solid collar.

Tracy, The drive wheel is 6" in diameter 2 1/2" wide with a 1 1/4" arbor hole that fits on the arbor (you'll need an extra arbor) that my grinder uses hardness is 97A and I chose serrated because it seems to be the standard that everyone else has used mainly I think because of cooling. If you...

Thought I would share this conversion since it doesn't require a lot of machining mostly off the shelf stuff and some welding, drilling and tapping. The wheels came from www.sunray-inc.com the rest from the local hardware store except the collar that came from MSC. The collar fits on...

48 Please thanks for the chance.

She is in our prayers.

John, FYI the knife arrived safe and sound today. Thanks Again Tim

Wow Thanks John

I'm in congrats on 2000

Les, No it's for when I'm grinding flats the arm seems to get in the way of the left hand unless you have the rest pretty much as high as you can get it which then means you can only use the top part of the flat platten by moving the arm down it give access to more of the platen.

I've alway found that the tool arm of the map was hard to get out of the way when flat grinding longer blades. I had to set it up so I was only using the very top of the flat platen if I wanted clearance for my hand on the left side around the MAP tool arm. Before So after looking at...

Prayer and Smoke coming his way!

I'll take 48 Thanks, Tim

Prayers coming his way.

Thank Bill, I'm in.

Prayer on the way!

Back for Monday Thanks Jeff