Search results

  1. cnccutter

    Evenheat Oven Problem

    The steel band that holds the oven together can be tightened. Have you tried something easy like pushing the brick back into place and retightening the band? Even our ovens need a little TLC once in a while. Erik
  2. cnccutter

    Tracking Problem

    Kevin, I know pics can be diseptive, but the first one of the 12” wheel appears that the bar is slightly twisted. The 12” wheel would magnify this problem and may way to shove your belt in a certain direction. You may want to check the shaft just to rule it out. Erik
  3. cnccutter

    Glow in The Dark

    Wow, love the day time color too. Did you make the scales yourself? Erik
  4. cnccutter

    "Tactical" Tomahawk Request

    Call your steel provider. I happen to buy bulk from a supplier and they have a great store front but not everything they sell is in it. You want to make sure you have enough to get the job done when you start your project. Will 4” really draw out to what you need and give you room to work? Erik
  5. cnccutter

    Plunge line question

    You didn’t say where your tracking your belt. Letting it hang over will soften the plung line. If your not tracking the same amount on both sides it can give you fits.
  6. cnccutter

    Wanted to Try Knife Making

    On top of it all he’s using mild steel which won’t make a decent knife either. You can get started in knife making pretty cheap if you pursue the forum. Erik
  7. cnccutter

    Questions metal heads/(machinists)

    If I understand you right Cliff, it could be boarded on a lath with a four jaw chuck. Erik
  8. cnccutter

    KO or KF

    I bought my KO18 with Tap controls about 6 months ago. I love the oven and it can be a rocket if you want the temp to climb fast. When I bought it, I was told the the difference between the KO and KF was two things. One, the walls in the KO are a little thicker. I went and measured mine and...
  9. cnccutter

    Walnut blocks

    I love walnuts and would love some , Thanks Gene! Address sent Erik
  10. cnccutter

    The spendy part of Knifemaking

    Ed, if you want it to be less painful, start thinking about it in Knife units... how many blades do I have to sell to do this. In your case that's only one! And you love making knives!
  11. cnccutter

    Slip joint pocket knife.

    Calvin, you keep setting the bar pretty high for the rest of us. You better be carful because one day you might not be able to make it over yourself. :) Great finish to a great knife Erik
  12. cnccutter

    Stockman for ICCE

    Absolutely wonderful. Gives the part time maker like me something to dream about! Erik
  13. cnccutter

    Slipjoint for ICCE

    Pretty nice Calvin, nice to watch it progress through the stages to the finished folder. Erik
  14. cnccutter

    Wat is

    Turns off the power to the elements when you open the door. Keeps you from lighting up your socks if you accidentally touch a coil with the tip of your blade. Erik
  15. cnccutter

    Pet blade steels

    Ted, I don't really think this is a "stock removal" question. The underlying question is relivent to forging too. Are we starting with a steel that is consistent from knife to knife, batch to batch and year to year. If we truly are getting that in the steel we buy, then we as knife makers can...
  16. cnccutter

    Any one else see the total Eclipse?

    You be around Cliff, only have to wait 7 years and it happens again but arcs the opposite direction across the states! Good time for a road trip with the family!
  17. cnccutter

    Slip joint pocket knife.

    I don't think a year would truly be enough time to properly evaluate the folder. I'd say more like 5 years to get a good sense, maybe longer! Erik I don't think a year would truly be enough time to evaluate it properly. Ma
  18. cnccutter

    “Trinity” by Jean-Louis Regel MS & more...

    When you get to see the works of art like this it really drives home the talent and dedication these people have towards knife making. That's the reason they are Master Smiths! Erik
  19. cnccutter

    Rulz is rulz....

    Everyone is missing the point AND an opportunity. I am perfectly happy to adhear the a three shelf limit. In my shop the shelves happen to be 30 feet long! Just build longer shelves and market it as shop cleaning and organizing. I think there is also a name for guys like John, enablers ! Erik
  20. cnccutter

    GoPro Caught on Film!

    Ok, someone hasn't been spending enough time in the shop and too much time playing! Pretty cool video. Erik
Top