Search results

  1. C Craft

    I received my KITH from Retroguy

    Now that is downtown Brown! A gift anyone would like!!
  2. C Craft

    Prayer request

    Prayers going your way! This has been a tough year for my wife and myself dealing with her cancer!! Somedays it has only been my faith and good words from friends! Hang in there back in 97 I was hurt in a five car pile-up and had back surgery in 98. Which subsequently failed it was a tough...
  3. C Craft

    Yeah, I'm still here! My latest...

    Anthony, that is outstanding work on that one!! Love it!! The story, the tribute, and the honoring of the man's life. That is a special blade!!
  4. C Craft

    Catalog by R.W. aka Bob Loveless

    Gotta love the guarantee on page 8. That is no bones guarantee, especially the last paragraph!
  5. C Craft

    My latest

    So, I already told I like it!! you done real good. now I got a question after taking a second look at the knife and the pic above something caught my eye! Where did you get the point protector? Or did you make it? I have split vinyl tubing but, I only use to protect me from the edge/point while...
  6. C Craft

    Leather Sewing Machine

    Opaul there was a thread about this a while back by Ed I think. If I can find it I will put a link!! Here it is maybe it will help to make your mind up!! https://knifedogs.com/threads/considering-a-sewing-machine-for-sheaths.47891/
  7. C Craft

    I talked about this before but...…...

    Yep, thanks Ken! I am trying to figure this out as to what the grain becomes after cutting. Heck I have hand picked a lot of wood for the grain but, ……... it was already cut and I could see the grain. :p To me the first thought was to cut slices off of the existing block. However some of...
  8. C Craft

    I talked about this before but...…...

    No one has any ideas on the grain? These are bowl turning blocks. What I am trying to figure out what the 2"x2"x6" blocks are going to look like once sliced off of the side of the block!! Are they going to turn out like this?? Anyway I was hoping to generate some discussion. I know in the...
  9. C Craft

    My latest

    Looking good Daniel. When you can please yourself you are well on your way!
  10. C Craft

    I talked about this before but...…...

    I talked about this before in this thread, https://knifedogs.com/threads/question-on-handle-material.49652/ but,...……. When buying bowl material from Ebay to cut for handle material. Which is more desirable! This block that is cut close to the heart of the tree??? Or one like this that is...
  11. C Craft

    Heads Up!

    Yep Tracy will take care of you. Good people to work with! Who was the carrier? I worked on a snack bar renovation that was inside of a large postal facility, USPS locally. Almost got clobbered with a package they had thrown at the different push carts going to different areas. They would...
  12. C Craft

    Forge question

    Nothing real dramatic about the modification. I would have to go back and look-up the actual orifice size! The jet has been shoved deeper into the burner itself. They say it will handle the force of the air better and blend easier. The guy that uses this set-up has a special gas set-up. He...
  13. C Craft

    Forge question

    Correct on what you are seeing. The jets are in but have been modified! It works like the Mongo burner! https://ronreil.abana.org/Sidearm.jpg In the drawing above it shows a choke assembly in the air inlet. I decided to go with the gate valves instead! The gate valves act as an additional...
  14. C Craft

    Forge question

    Welding is one of those things like riding a bicycle, you don't forget but the older you get the less comfortable the ride is!! :p Those are a modified Ron Reil burner! This latest version will be blown! Here is a better shot from the rear. These will definitely bring me some grief but in...
  15. C Craft

    Forge question

    Ken, if I might be so bold to suggest. Ed, helped me with the angle of the burners on this forge! Pointing upward somewhere between the 2-3postion. Think vortex. The flame creates a swirling effect in a counter clockwise motion looking on mine from the front. If you look closely at the first pic...
  16. C Craft

    OPaul's KITH Sheath

    Real nice one opaul!! The sheath and the knife look good together!!
  17. C Craft

    Another burner problem with pics

    Those look like Reil burners but they are compiled way different! https://ronreil.abana.org/design1.shtml What are the gauges on the back of the burners for. Unless they are in-line with the gas to the burner you are not going to get a reading! This from site...
  18. C Craft

    Calling the resin casters!

    Not really sure what kind of casting your talking about but, this link here is all about casting, If you use the links at the bottom of each page, it will take you to the link on casting! https://www.epoxyworks.com/index.php/casting-epoxy/ The do's and don'ts and how to overcome them.
  19. C Craft

    Calling the resin casters!

    So I have been bragging about the West System epoxies!! Take a look at this thread! https://knifedogs.com/threads/west-system-epoxies.50466/ Then go to this link! https://www.epoxyworks.com/index.php/using-a-quick-mold/ At the bottom of each page is a link to move forward and backward. The...
  20. C Craft

    West System Epoxies

    So for those who don't have the magazine. Start with this link. https://www.epoxyworks.com/index.php/epoxy-resin-and-hardener-basics/ It is the 50th Anniversary edition and there is also a place to order the digital magazine!! At the bottom of the page a link to move forward and backward...
Top