Search results

  1. Chuck Gedraitis Knives

    Green Jade G-10 blocks for sale

    Green Jade G-10 blocks for sale. I have more than I will ever use and have more than 10 of each size available for sale. The smaller blocks are 3/4in thick, 2in wide and 5in long. Could easily be split for a set of scales. $5 per piece The large blocks are 1-1/2in thick, 2in wide and 5in...
  2. Chuck Gedraitis Knives

    No rust cooling dip

    Just add baking soda to the dip bucket, does the same thing.
  3. Chuck Gedraitis Knives

    NCCA Knife show Sunday Nov, 6th in Marlborough, Ma.

    I will be exhibiting at this show on Sunday, please stop by if you have the time. MARLBORO, MA KNIFE SHOW Sunday, November 6th, 2016 Marlboro, MA - Holiday Inn (508) 481-3000 I-495 exit 24A. Show hours: 9am-2pm
  4. Chuck Gedraitis Knives

    Chuck Gedraitis Custom slip-joint for sale

    Hello, Available for sale is one of my custom slip-joints. The blade is 2-9/16in long made of Rob Thomas ladder pattern stainless damascus and opens with a long pull. The bolsters are titanium with a light orange peel finish and have been heat colored bronze. The scales are polished black...
  5. Chuck Gedraitis Knives

    2 superconductor beads for sale

    2 superconductor beads for sale. The round one is 1/2 in thick, 3/4in diameter with a 9/32 hole. It has been lightly etched price is $65 The long bead is 1/2in thick, 3/4 in long and had a 13/64 in hole. This one has faceted sides. Satin finish. There was a small flaw in it that has been...
  6. Chuck Gedraitis Knives

    Large pattern copper/niobium superconductor for sale.

    I still have a few slices left if anyone is interested. When it's gone, it's gone.
  7. Chuck Gedraitis Knives

    1in diameter superconductor rod for sale

    Available for sale is some 1in diameter copper /niobium superconductor rod. Excellent for beads, tops, inlays, knife parts, pivot collars, jewelry and more. Priced at $100 per inch. Thank you for looking, Chuck
  8. Chuck Gedraitis Knives

    Anodizing Titanium with Detent Ball

    Did you mask the ball with nail polish on both sides of the detent hole? The trick is actually letting the nail polish dry and putting it on thick.
  9. Chuck Gedraitis Knives

    Large pattern copper/niobium superconductor for sale.

    Up for sale is some large pattern copper/niobium superconductor. It Is 3-1/4 in diameter @.145 thick, has a large bold pattern and is made of copper/niobium. It cleans up very nicely. Price is $60 per slice Prices include delivery and paypal is preferred. The pucks shown are just to show...
  10. Chuck Gedraitis Knives

    WTB Antique westinghouse micarta

    WTB Antique westinghouse micarta, let me know if you have any you would be willing to part with. Thanks, Chuck
  11. Chuck Gedraitis Knives

    Kit Carson small model 4 for sale

    Up for sale is a Kit Carson small Model 4 liner lock. 3-3/16 ATS-34 blade with a bead blast finish. Sand blasted titanium liners and bolsters with kydex scales and black G-10 spacer. 7-9/16 overall open with dual thumbstuds and tip down carry clip. Good condition with some handling marks...
  12. Chuck Gedraitis Knives

    Copper/Nickel Niobium Superconductor for sale.

    Available for sale is some copper/nickel niobium superconductor. This material is used in particle accelerators and made into wire that is used in MRI machines. I have 10 pairs of this material for sale at this time. They are 1-3/4in round and approximately .145 in thickness. They have been...
  13. Chuck Gedraitis Knives

    Getting knives to out of state shows

    IF you don't own a gun or the proper permits to be transporting them across state lines then you are out of luck. I mail my knives on Tuesday before a show and let the hotel receiving them know so they accept the package. Mailing them early gives the carrier time to get them to me before the...
  14. Chuck Gedraitis Knives

    Chuck Gedraitis triple bolster liner lock folding dagger for sale

    Hello, I hope that you are keeping warm this winter. I haven't made anything like this for a while and most likely won't make anything similar anytime in the near future so this would be the chance to add a unique piece to your collection. The blade is 4-7/8in long made of Darryl Meier...