Search results

  1. FORGE


    C's, forged from 1080 /15N20,stainless fittings Micarta and
  2. FORGE

    Small Damascus Hunter

    The last one for 2019. Small hunter 1080 /15N20 twisted crushed W's Damascus ,stainless fittings, black linen micarta handle, dovetailed bolster.
  3. FORGE

    A Couple of San Mai Chef Knives

    Core 52100 with 420 SS sides G 10 handles
  4. FORGE


    I forged a San Mai blade out of 416SS and 52100. I have made about 20 of these and never had a problem. I heat treated it 1500 Deg F and tempered at 400 Deg F. Everything was fine, I looked at the blade two days later and everything was fine on the 3rd day I decided to finish the blade. When I...
  5. FORGE


    Done except for the leather work .......and I hate leather work ! I heat blued all the stainless fittings except for the guard.
  6. FORGE


    A BIG ....... Walrus
  7. FORGE


    Finally got the tusk cut, guard made and a lot more finishing to do
  8. FORGE

    San Mai

    I got all my Micarta from Sheffield Knife Supply in Florida, but I believe there were going out of business last I heard.
  9. FORGE


    My number has not changed you must have hit the wrong button.
  10. FORGE

    San Mai

    No nickel, just 52100 and 416SS
  11. FORGE

    San Mai

    52100 core with 416 SS on the sides Turkish Walnut handle ( scraps from a custom gun maker)
  12. FORGE


    A BIG ....... Walrus
  13. FORGE


    4 bar twist from 1080 and 15N20 Just got it heat treated and etched, now the fun starts guard and handle. Got this tusk that has been around for a long time,think I will use it.
  14. FORGE

    2 More for the Show

    Great looking knife and axe Raymond. Have a good time at the show. Cal
  15. FORGE

    Overtime Bowie

    Looks good Raymond !
  16. FORGE

    Damascus Kitchen Carver

    1080/15N20 twisted crushed W's , stainless bolster , G10 handle
  17. FORGE

    Hyd Press

    Ben , might I suggest that you get some high temp silicon rubber to protect the cylinder rod. When the cylinder is mounted below the work, scale will get trapped in the rod gland and eventually gouge up the cylinder rod.
  18. FORGE

    African Blackwood X 2

    Looking good Ray!!!!!! What ever happened to that old glove and burlap you had in all your knife pictures ?
  19. FORGE

    Certified Rockwell C sample...

    Ames wants $105.00 for this test block, but it is a bit more accurate than what you are describing from McMaster. I would say that + or - 5 is not much of a calibration block. None of this stuff is cheap. I have a portable Ames tester and the plastic dial face crystal has a crack, I think they...
  20. FORGE

    The last two for 2018

    I started with 29 layers of 1/8 (15) 1080 and (14)15N20 alternating. Then I did a 4 stack,4 stack and a 3 stack, forged the last billet into a 1 1/2 inch square piece, cut it in 3 and forged it from a vertical piece into a horizontal piece and rolled it out that is what gave me the knife with...