Search results

  1. Gliden07

    What's going on in your shop?

    A friend of mine gave me the first piece of Demascus he made. Real low layer count and small. I decided to put a few twists in it so I squared it up, then twisted it a few times for the heck of it. Made a boneing knife with the blank. Did a quick Ferric bath just to see pattern. Wish it had more...
  2. Gliden07

    I have to get creative on this one.

    Make the wood as wide as you want then inlay the Titanium into the wood. This is what I ment. Don't know if you can do it with the Titanium? I also saw a cool video how to anodized Titanium also. That would be a cool affect!
  3. Gliden07

    I have to get creative on this one.

    What about inlays? Some one on here has done wood with wood inlays. I think it was Gene Kimmi?? You could still use the screw on fasteners and predrilled holes and get the added width you need.
  4. Gliden07

    Any shipping problems?

    USPS as much as I hate saying it is pretty bad. Like others on this thread have said its hit or miss with them! I've had things I've ordered show up in 2 days (or early) and I've had stuff not show for 2 weeks that was suppose to be there in a few days. Half the time the tracking isn't even...
  5. Gliden07

    Mill suggestions

    Thats the one I have!
  6. Gliden07

    New addition to my shop

    Chris how's this press working out for you?
  7. Gliden07

    600 Grit Belts?

    Interested in this for sure. I've had GREAT luck with the Sankyo belts and Pops too!!
  8. Gliden07

    Forged In Fire New show, Beat the Judges

    As far as the "Initial" design i ment the first knife the 4 contestants have to make prior to moving on. You pretty much addressed that with "They also do some testing..." comment. I know that this show is not a GREAT representation of most of the knife makers skills but I like to watch it when...
  9. Gliden07

    Heat Treating Oven

    I was reading a post asking some questions about this subject. I didn't want to hi-jack the post but had some questions too. Why does everyone want the TAP control vs the Cheapie 3 button? When you heat treat do you put knife blanks in as oven is heating or after its heated? When doing "Stepped"...
  10. Gliden07

    Heat Treat Ovens, Looking for Input

    I think the new Paragons come with electronic relays already installed? That was a plus for me when doing research. I never got oven because I was layed off.
  11. Gliden07

    The Gamblers Bowie

    Beautiful!!
  12. Gliden07

    Forged In Fire New show, Beat the Judges

    David Baker makes all the "FINALS WEAPONS" I would guess he makes a fare amount of the initial designs too, but that I dont know?
  13. Gliden07

    What's going on in your shop?

    Thanks Dennis! That means a lot coming from you! Everyone's comments have been very encouraging!!
  14. Gliden07

    What's going on in your shop?

    Well finished first apron. Sold to a local Blacksmith! More interest so I have another on the bench. Gonna get some Beauty shots for my Etsy page prior to delivery.
  15. Gliden07

    What's going on in your shop?

    Woods beautiful for sure!
  16. Gliden07

    What's going on in your shop?

    This is the configuration I used on my prototype.
  17. Gliden07

    What's going on in your shop?

    No legs yet. I planned on trying a basic apron first. Asked my local forging pals to help me on design. I like simple and this is what I came up with. 8" at top, bottom 24", 16" from top to transition then 18" to bottom, 34" top to bottom. Pocket is 4" wide x 5" long, enough for Sharpie, pencil...
  18. Gliden07

    What's going on in your shop?

    The reason I decided to make them was something similar started at $249.00!!! It had a few more pockets and Leather straps. I polled my local forging friends and all except 1 said they would prefer the Nylon straps to conserve weight. They also wanted no pockets except the upper one for a...
  19. Gliden07

    What's going on in your shop?

    Not a knife but making some Leather shop/forging aprons! 6-7 ounce utility grade Leather. Nice distressed look to it! Only one pocket up hi so you don't get a pocket full of scale into it. Have some Olive Green web strapping for the harness, fiberglass reinforced hardware, to keep weight down...
  20. Gliden07

    Knife ad I just copied from FaceBook...

    This is an add from Serbia it looks like. Could be the way his written ad translated to English? It is funny though!
Top