Search results

  1. lerman

    first batch of Hydra flippers

    Hello, after two months in the making (one month more then i tought) i finally finished my first batch of Hydra flippers, this was a great challange for me, i'm pleased with the end result but there is always room for improvement. link to the WIP...
  2. lerman

    Hydra flipper first batch WIP

    Hi, i made the first Hydra proto about a year ago, since then i have made a second proto that i was very pleased with and now it's time to put them into production and start working on the first batch of orders, i will be uploading pics as i go, here are the first two weeks: the frames and...
  3. lerman

    pair of mini Nessmuks

    fresh off the bench blades: CPM D2, 5mm, 60 HRC. handles: snakewood and black & white ebony. overall length: 21cm sheath: leather
  4. lerman

    friction folders - zirconium & moku-Ti trio

    Hi, it's been a long time since i last posted anything, just finished this trio of friction folders- blades: CPM D2, 2.5mm thick, 59-61HRC handles: Chad Nichols Moku-Ti. zirconium. 2mm thick titanium liners and titanium screws. overall length:17cm double sided ceramic detent...
  5. lerman

    Moku-Ti friction folder

    Hello, just finished a special, it was my first time working with Moku-Ti, what an amazing material. blades: CPM D2, 2.5mm thick, 59-61HRC. handle: Chad Nichols Moku-Ti, lite blue anodized 2mm thick titanium liners and titanium screws. overall length:17cm. thanks...
  6. lerman

    new workshop WIP

    Hello, i didn't post much lately as i was busy renovating my new shop, here is a a short WIP i did. my older shop was a 100 square feet room so moving to a bigger place was long overdue, the new place is 750 square feet and is divided to five main rooms and a kitchen. a dirty room for...
  7. lerman

    ghost G10 mini Nessmuk

    Hello, i just finished this custom order. blade: CPM D2, 5mm, 60 HRC handle: ghost G10 with titanium chain ring bolts. overall length: 21cm sheath: clear holstex thanks for looking.
  8. lerman

    friction folders- 9 batch

    Hello, i haven't posted for a long time as i was working hard on this project to finish it in time as i'm just about to move to a new shop. blades: CPM D2, 2.5mm thick, 59-61HRC handles: marble carbon fiber lightning strike carbon fiber stabilized manzanita burl wood padauk root...
  9. lerman

    friction folders- 9 batch- WIP

    Hello, i haven't posted for a long time as i was working hard on this project to finish it in time as i'm just about to move to a new shop. broken tap blades are back from HT...
  10. lerman

    two new Nessmuks

    Hello just finished this pair on Nessmuks, blade: 6.35mm (1/4") CPM D2, full flat ground. handle: bone micarta with copper spacers and tube pins, stabilized wenge wood with stainless tube pins, overall length: 29cm thanks for looking Lee Lerman
  11. lerman

    Hydra flipper- WIP

    Hello, there are alot of firsts for me in this project, it's my first flipper, my first bolster lock, my second liner lock made and my first time instaling ball bearings on a knife, i'm still not sure if i'll even be able to make it all work, this is going to be a very long WIP, I'll only work...
  12. lerman

    Ti anodizing power supply help

    hello, i need some help with buying the right power supply for anodizing titanium, i have absolutely no idea what i should buy, my understanding of electronics is nonexistent :) one more problem is the current here in israel is 220v. thanks
  13. lerman

    solingen knife makers show best folding knife aword

    solingen knife makers show best folding knife award just got back home yesterday from the solingen knife makers show, this is my second time attending this show and it was an amazing experience for me, met alot of great makers and collectors, but my highlight was winning the aword for best...
  14. lerman

    pair of chef's knives

    blade: CPM D2, full flat ground, 2.5mm thick 5.5cm wide, 59-61HRC handle: 690 carbon fiber with G10 spacer and titanium chainring bolts overall length: 31cm kydex edge cover thanks for looking. Lee Lerman
  15. lerman

    friction folders- 4 batch

    Hello, just finished these four friction folders for the upcoming solingen knife makers show in May. blades: CPM D2, 2.5mm thick, 59-61HRC handles: carbon fiber lightning strike carbon fiber blackwood titanium all with 1.8mm thick titanium liners and titanium screws overall length:17cm...
  16. lerman

    Damascus Libratum

    blade: L6 and 1080 damascus, 5mm thick handle: 5460 years old stabilized bog oak bolster: 925 silver with black zirconia stones setting overall length: 25cm damascus by Rudi Zirlin Custom Knives stone setting by Oleg Leybman here is a link to WIP...
  17. lerman

    need help with instaling a detent ball

    hello, i'm in the process of installing detent balls on my friction folders, both for open and closed position, i milled a small spring bar into one of the liners and set a 1.5mm ball in it, so far so good, but in all my tests i can't seem to get the positin of the holes the blade in the right...
  18. lerman

    tapmatic 30x rubber collet - help

    Hello guys, i wanted a tapmatic for a long time now and finally got one in a trade with a friend, problem is that he didn't have the collets for it, i can't find any on ebay, enco has two sizes made by jacobs but they don't ship to israel :( , does anyone know where i can find them...
  19. lerman

    Nessmuk with ebany

    Nessmuk with ebony Hello, fresh out of the oven blade: 6.35mm (1/4") CPM D2, full flat ground with convex edge. handle: stabilized indonesian ebony with stainless tube pins overall length: 29cm PS, sorry for the typo in the title, i can't fix it for some reason. thanks for...
  20. lerman

    Orange Nessmuk

    Hello, just finished another one blade: 6.35mm (1/4") CPM D2, full flat ground with convex edge. handle: orange juice factory camouflage :D (orange G10) with steel chain-ring bolts and a moon glow inlay. overall length: 29cm thanks for looking.
Top