Search results

A Letter Opener OR ?? SOLD Hello folks , I made this knife back in 1993 when I first started . Made it for my wife but we have now decided to thin down our belongings so this is going . I decided to make a stand for it and call it a letter opener . There are a couple of tiny pits in the blade...

Finished this up a little while ago , thought I should put it up for sale . It was first flat ground from oversized 3/16" A-2 tool steel . Heat treated to an Rc61-62 and then I finished up with a convex grind and a scotch bright belt satin finish . This was a very interesting grind with the...

Field & Stream or Bird & Trout ? SOLD another one I recently finished . This knife was flat ground from 5/32" ATS-34 steel , belt satin finished and heat treated to an Rc. 60-61 O.A.L. is 9" Blade is 4-1/2" with a sharpened edge at 4-3/8" . It is 1" wide edge to spine Handle is Coyote Tan...

Your Outdoors Companion-price drop Hello all , been a while since I posted here . I have this knife to offer for sale . It was hollow ground from 5/32" A-2 tool steel . Heat treated in my shop to an Rc. 60-61. It has a fine scotch bright belt finish . O.A.L is 8-3/4" Blade is 4" with a...

Hi folks I put this one together to be a back-up/boot knife . Also would be great as an EDC knife . It is flat ground from 3/16th O-1 tool steel . Peters heat treated to an Rc. 59 . Scotch Brite Satin finished O.A.L is 8-1/4' The sharpened blade edge is 3-1/2" and 4-1/4" tip to cord Olive...

Designed this knife as an every day carry in the Wharncliffe style . Flat ground , machined satin finished 3/16th O-1 tool steel , HT to an Rc. 59 O.A.L is 7-1/4" Blade tip to handle is 3-1/8" Edge is 2-7/8" Width at Ricasso is 1-1/8" Handle is Camphor Burl with 303 s.s. pins Sheath is 7-8 oz ...

Two of Robert Crowder's 'Oda Fighters ' from my collection up for sale . Both knives are 1/4" ATS-34 , hollow ground , mirror polish finished . Both have a sharpened top clip and tapered tangs and dovetailed bolsters. The smaller one has red liner and mosaic pins . The sheaths were hand made...

These two knives were ground from 5/32 A-2 steel , they were heat treated by Peters Heat Treat to an Rc. 61 . They were flat ground with a distal taper and hand satin sanded to a 500 grit finish . Specs. are the same for both . O.A.L. is 8-3/4" Blade is 4-1/8" tip to plunge Sharpened edge is 4"...

A nice sized every day carry knife in the wharncliffe design . The blade was heat treated by Peter's heat treat to an Rc. 61 . It is A-2 , 5/32 steel ,flat ground and scotch bright satin finished , the specs. are Steel - A-2 , 5/32 O.A.L is 7 1/4" Blade is 3 1/4" with a sharpened edge at 3 "...

hello everyone , I ground this knife out of a piece of 5/32 ATS-34 steel , the blade has been ground down to .065 just a tad over 1/16" to give it flex . Paul Bos did the heat treat to an Rc. 58-59 . Specs are: O.A.L is 11" Blade is 5-1/2 " flat ground and hand sanded satin finish to a 500 grit...

I don't remember if I did this or not . So to be on the safe side here I am . I am Jack ONeill , started learning how to make knives as a hobby in the early 90's . I'm still learning . We live in a nice quiet small town in southwest , Washington . A big population of 360 here in Naselle and 1200...

A Dan Graves made damascus dagger , 1095 and nickel with nickel silver fittings . The dagger is screwed together and bonded . Handle is an interior cut of mammoth ivory with tan and white color . A Geode and Mahogany wood stand . The o.a.l. is 5-5/8 inches and the blade length is 3-3/8 inches ...

Read the story on the post below , damaged 110 fixed it for me .

Hi there every one . I was looking around on this forum and saw lots of familiar folks and some not so . So I signed up . Just what was needed for those raining days when you just don't feel like going out to the shop . More knife related reading . :eek: 2thumbs