Search results

been a while since i posted,so here goes.... the Warhead Framelock was the 1st framelock i built,when i 1st started making folders. yes,some people correctly call the framelock the Reeve Integral Lock [like the liner lock is the Walker Lock],but that's a mouthful,and knifemakers know what's what...

the EDC Warheads were completed at the end of december. these are basically edc friendly Warheads,slimmed down from the bigger brother. 9.13 oal,3.85 blade,5.19 closed. Blade material is 3mm thick Rose Damasteel. Liners are 2.7mm thick 6-4 ti,bolsters,clips and thumbdisks are cp grade ti...

it's been a while since i used Arizona Desert Ironwood,which is a really beautiful wood. first up is the Shikari. steel is 6mm thick Bohler N690,hardened to 59/60 HRC. oal is 16.625 in with a 10.75 in blade. scales are ADI with cutlery bolts and red fibre liners. the guard is 303 SS with a...

2 General Clusters and a GC XL II. the Generals are 10 in oal with a 5.5 in blade. ranger green G10 scales on 1 and Indian Water Buffalo scales on the other. i ground finger choils in front of the integral guards on these 2,for control,and looks. the GC XL II is 17 in oal with a 10 .5 in...

Smyth:biggrin: Jim agreed to trade with me and this is what i [finally] made for him. i'll post pics of what i got from Jim after he gets his blade [he sorted his end some time back]. Large Tracer specs - 6 mm Bohler N690 hardened to 59/60 HRC. 12 in oal with a 6.5 in blade. contoured...

i finished another of the Al Mar-inspired fighters [called the AM-IV],and a bolstered Megashark,recently. the bolstered Megashark was a challenge,but i enjoyed it. the AM-IV is 5mm thick Bohler N690,hand-rubbed,with 303 bolsters and ss thong tubes,polished on the i d. oal is around 12.5 in...

over the last 7 weeks or so. EDC Tanto 4mm thick Sandvik 12C27 hardened to 59/60 HRC. 7.75 in oal with a 3.85 in blade. carbon fibre and silver twill G10 scales,with red/black/red fibre liners . hand satin finish. D'Urban Shark 5mm thick Bohler N690 hardened to 59/60 HRC. 10 in oal...

GCXL [General Cluster-XL] is a customer request for a General with a longer blade. oal is 15.7 in,blade is 10.8 in. steel is 6mm thick Bohler N690 [58/59 HRC] scales are Ranger Green G10 [used with permission] balance is about an inch and half in front of the handle. the Bonebreaker has a...

some of my latest work - a General Cluster with Mammoth Ivory scales and black fibre liners 6mm thick Bohler N690 hardened to 59/60 HRC UTAC with Water Buffalo scales and white fibre liners 5mm thick N690 hardened to 59/60 HRC EDC Shark with Water Buffalo scales and red fibre liners...

has anyone tried these? seems to better than the Blaze [according to the Norton ad brochure] tia

i finished these a few weeks back. EDC Sharks with carbon Fibre scales and red fibre liners. steel is 5mmthick Bohler N690 hardened to 59/60 HRC. oal is 9.125 in with a 4.75 in blade. the client wanted to present these to a few guys working on a project for him. boxes are by Johan Nel...

starting with my latest. SHARK TANKS [folders], fixed and trainers i had this order for folders for a while but had to re-organise my drill presses before i could begin on folders again.took me a while but i eventually got down to it. a buddy wanted a set consisting of a folder,a fixed...

greetings to the guys and gals at Knife Dogs. i'm Humayd A R Mahomedy,knifemaker, from South Africa. i see some names i recognize,and some might recognize mine from other forums.