Search results

There's 16+ feet of W-2 that's 3/32 thick and 3/16 in wide spring material. Great for lockback or automatic springs. $30 delivered.

For sale are 9 sets of mosaic damascus bolsters made by Joel Davis, Bob Eggerling and Chris Marks. Some have 3 pieces and there are 3 larger pieces that could be cut in half to make into a pair of bolsters. Approximate sizes are listed and the thinnest ones are .100 thick. Looking to sell as a...

This is vintage rag micarta made in 1954 and was cut from Army mess hall trays. These pieces could be used for shields, inlays, or if cut correctly small folders or even thumbstuds or disc's. The mat the material is on is 13X9. Price is $225 delivered.

Titanium pocket clip blanks for sale. These are for milled pocket clips. 2-3/8in long, .155 thick. 40 pieces total. $110 delivered. These are sold

I will be exhibiting at this show on Sunday, please stop by if you have the time. MARLBORO, MA KNIFE SHOW Sunday, November 6th, 2016 Marlboro, MA - Holiday Inn (508) 481-3000 I-495 exit 24A. Show hours: 9am-2pm

Hello, Available for sale is one of my custom slip-joints. The blade is 2-9/16in long made of Rob Thomas ladder pattern stainless damascus and opens with a long pull. The bolsters are titanium with a light orange peel finish and have been heat colored bronze. The scales are polished black...

WTB Antique westinghouse micarta, let me know if you have any you would be willing to part with. Thanks, Chuck

Up for sale is a Kit Carson small Model 4 liner lock. 3-3/16 ATS-34 blade with a bead blast finish. Sand blasted titanium liners and bolsters with kydex scales and black G-10 spacer. 7-9/16 overall open with dual thumbstuds and tip down carry clip. Good condition with some handling marks...

Hello, I hope that you are keeping warm this winter. I haven't made anything like this for a while and most likely won't make anything similar anytime in the near future so this would be the chance to add a unique piece to your collection. The blade is 4-7/8in long made of Darryl Meier...

Good Evening, Here is a link to a slide show with all the knives I will have at the 2014 blade show, table 5-E. Thank you for looking, Chuck http://s568.photobucket.com/user/knifemaker_1999/slideshow/Blade%20show%202014

Here's a couple of gents folders I just finished up. The small one has a 1-7/8in damascus blade with textured Ti bolsters and the larger has a 2-1/8in CPM154 blade with mosaic damascus bolsters. Both have stabilized curly Koa scales. Thanks for looking, Chuck

I have recently finished these knives and I thank you for taking the time to look. The Balisong is #122 and has a Mike Norris SS damascus blade, Ti handles and LSCF inserts. The Sora flipper with 1095 blade with hamon, bronze bolsters and Thunderstorm kevlar scales. The Toucan has a Mike...

A few years ago I made a few Scagel inspired folders and at the urging of a couple of collectors I have made a few more. These are a lot of work to make and require a lot of planning but the results are pretty cool and my original idea. All have 4in blades. The top one has a CPM154 blade...

Hello, Just as the title states, looking to buy some superconductor for bolsters. Let me know if you have any your not going to use anytime soon. Thanks, Chuck

Up for sale are 3 Saddlehorn slip-joints. The blades are 2-5/8in long to the front of the handles. Hollow ground with a satin finish and long pull. The blades and springs are ATS-34, the liners are 416 stainless steel. The spring sits flush in 3 positions, open, half stop and closed. Completely...

This is also a newer model called the Toucan and this is a flipper version for sale. The blade is 3-1/2in long, 7/8in wide at the widest and made of 154CM. The main bevel is hollow ground and the false edge is flat ground. The flats have a hand rubbed satin finish and the bevels a machine satin...

Up for sale is a custom damascus hunter by ABS Mastersmith J.D. Smith. This one has a 4-1/8n blade made of J.D.'s own damascus. The damascus looks like a loose W pattern. Dovetailed twist damascus boslters and African Black wood scales. It also has a tapered tang and comes with a leather sheath...

Just finished this up last night and it is available. The blade is 3-1/4in long made of Chad Nichols whiplash pattern stainless damascus. The bolsters, liners and clip are titanium that have been textured and lightly buffed. I hid the bolster screws for a cleaner look. The scales are LSCF and...

I'm looking to install an exhaust fan in my grinding room to get some air flow, remove smoke and airborne dust. It could be placed to just blow outside. Anyone think that a portable blower ventilator fan would work? Or am I better off with a wall mounted exhaust fan with shutters...

These are a few of the balisongs I will have at the blade show. Including a Swiss Army Balisong.