Search results

Blade is 2.68" long, satin finished, from 1/10th 12c27 Liners are 1/16th black g10 Bolsters, 1/8th black g10 Scales, 1/8th copper shred carbon fiber Knife has a half stop and is flush in all 3 positions... Nice walk and talk with very good snap both ends Single swedge and long pull instead of a...

Been meaning to do this one for a while - the design and profile has been on my desk for almost 2 years - somehow other stuff kept coming in the way.... Blade is 2.68" long, satin finished, from 1/10th 12c27 Liners are 1/16th black g10 Bolsters, 1/8th black g10 Scales, 1/8th copper shred carbon...

Another one of the micro FF's. Blade is 2" long and from mirror finished 1/8th N690, with a high flat grind, runs on Nilatron washers. Liners,lanyard tube and clip - brass, Pivot and assembly screws are stainless, pivot adjustable for tension. Scales from polished LSCF Rear stand off is from...

Second one of these I have built. Blade is 1/10th 12c27, mirror finished, with a total length of 3.1" and a cutting edge of 2.9" Liners are 1/40th yellow G10, Bolsters are woven carbon fiber Scales are 1/8 white C-tek, stainless furniture. OAL open is 7.2" and this one weighs in at 1.47oz

My "San" model friction folder is named for one of the indigenous Bushman tribes, and does not normally come with the clip point blade as an option - this one was a special request by a client. Blade is from 1/8th N690, high flat ground and mirror finished. Liners, pins and lanyard tube -...

I am not sure if I've shown you guys this one before. It came about as an adaptation of a custom design I did for a client. Apart from the original knife, which had a different blade profile and layout, this is the first one in wooden scales. All the others were done in micarta, normally...

Another one in the "Modern Classics" range that I am busy with. Blade is from 1/10th 12c27, mirror finished and 2.6" long. Liners are 1/16th black micarta, bolsters form 1/8th micarta and scales are 1.8th Lightning Strike carbon fiber. OAL open is 5.88" and it weighs in at 1.4oz (40 grams)...

My latest Mini Hog Friction folder. Blade is from 1/8th N690Co, mirror polished with file worked tang. Liners, pivot screw, lanyard tube and pins, polished stainless. Scales are warthog tusk. Rear standoff is polished black micarta. Blade is 2.5" and OAL open is 5". The pictures I think tell...

Tanto bladed micro Friction Folder in Copper Shred carbon fiber and brass - **SOLD** This one is SOLD, thank you Number 3, no family of the other two :) Blade is 2" long, satin finished, from 1/8th N690Co, brass liners, pins and lanyard tube, with copper shred carbon fiber scales. Rear...

A continuation of the Modern Classic theme. A couple of clip points First up, a Barlow style clip, 1/16th black G10 liners, 1/8th black G10 bolster, 1/8th copper shred Carbon Fiber scales, pivot, pins stainless, 2.64 inch blade from 12c27, OAL open 5.88" Next up, same pattern, in...

Clip point Barlow in Copper Shred CF and black g10 micarta -**SOLD** This one is SOLD, thank you kindly And the second one I put up for sale, cousin to the purple one...:) Barlow style clip point, 1/16th black G10 liners, 1/8th black G10 bolster, 1/8th copper shred Carbon Fiber scales...

My first ever knife offered for sale here at KD :D Clip point slip joint, in a slightly different color scheme Even though I chose it, I have to admit being a bit skeptical about this choice at first, as I'd not used this purple before, but it really worked. It has a "blue jeans" kind of...

As I said elsewhere, I was off the air for a bit, but not idle.... This little guy has a 2" long blade from 1/8th N690Co, brass liners, pins and lanyard tube, with copper shred carbon fiber scales, a black G10 micarta rear spacer/standoff and an adjustable stainless pivot screw. OAL open is...

This design started out as a liner locking friction folder, as can be seen here - http://knifedogs.com/showthread.php?38209-HKS-Locking-FF-version-black-c-tek and was adapted to be a slip joint. I also build it as a pure Friction Folder. The one pictured here was custom built for a client in...

This one came about due to the carry laws in the UK and some other places, where locking knives are forbidden as EDC, but may be used at home, when camping etc - and blade lenght is restricted to 3 inches. I make this knife in this format, as well as a pure FF and as a slip joint. In this...

This design has been on my CAD for months, and I'd cut and profiled it but never got round to building it. It basically sat there, waiting to "talk" to me - I know I wanted to do something kind of special with it but had not found the right material combo yet. Then finally this week I got what...

This one is just shy of 15" long at about 14.75" - made from 1/3 (8mm) O1 tool steel, differentially tempered. Handle slabs are from 1/4" (6.35mm) thick profiled black G10, sheath is from Kydex and designed to be quickly removable - the Hawk pops out front - in fact, you don't need to draw it -...

Then centurion was an officer in the Roman army, and in charge of 100 men. It was also a British battle tank, built in 1945, it became one of the most widely used battle tanks in history. Both us and the Israeli's have done several modifications and upgrades to the initial design, specifically...

If you notice a Scagel and Randall influence, you'd be correct ;) A selection of stick tang knives, made in the recent past: First up is a bird and trout, from 1/6th N690, stag handle: Next is a father and son set - a hunter and matching B&T: A dagger with wild olive handle: Next one up I...

A few "micro" Friction Folders I call this design the "San" - after one of the indigenous Bushman tribes here in South Africa. This is the "micro" version - sporting a 2" blade and an open OAL of about 5" - so still a usable size but quite small. Nice size for a watch pocket or keyring. I also...