Arbor Press + Steel Stamp

[Palacio]

I just got a 2 ton arbor press for stamping logos. I have been googling for an adaptor that will serve as a holding device for my logo stamp, but I can't find any Maybe some of you guys could share some infos on how you mounted your stamps on the ram bar

 

[Frstr8]

Martin Olexey does his stamps like that. Maybe he will come along and drop some wisdom.



Here is a wip that shows him stamping.


http://www.knifedogs.com/showthread.php?t=2303

 

[M.Olexey]

I just removed the ram from my arbor press and drilled a hole that my stamp would fit in into the end. Then to keep it straight I drilled tapped a hole in each flat near the bottom and screwed in 4 machine screws that clamp and straighten the stamp securely. It has worked well.