Andrew Takach
Well-Known Member
here's the last of three pieces i did from a billet i made. The materials used were w2 barstock, and 1080+ powder. I think the result was pretty cool.
The scales on this are cocobolo , and pins are 416 s.s.
The dark area towards from of blade at top is actually an unintentional hamon peeking through
Overall length is 8 3/8'' and has a cutting edge of 3 1/2''
Spine is about 1/4'' with distal taper to tip.
price is $250 with pouch type sheath + shipping
paypal prefered but other options can be discussed.
The scales on this are cocobolo , and pins are 416 s.s.
The dark area towards from of blade at top is actually an unintentional hamon peeking through
Overall length is 8 3/8'' and has a cutting edge of 3 1/2''
Spine is about 1/4'' with distal taper to tip.
price is $250 with pouch type sheath + shipping
paypal prefered but other options can be discussed.
