J. Doyle
Dealer - Purveyor
I have a small billet Damascus billet for sale. Perfect for even a large folder or guards, bolsters or spacers.
Steels are 1080 & 15n20. It is a lower layer crushed w/laddered pattern. The billet has been normalized, thermal cycled and surface ground and lightly etched.
***PAY ATTENTION***
The overall size is 7 1/2" long by 1 5/16" wide. The dimension of the full, usable piece with allowing for end waste and clean edges is:
5" x 1 3/16" x .165" thick. You might squeeze a bit more out depending on how you cut/use it but it's at least that big.
I rough ground a quick and dirty mock bevel on one end so you can see what a blade might look like.
Price is $75 shipped. PayPal preferred. US sales only.
Steels are 1080 & 15n20. It is a lower layer crushed w/laddered pattern. The billet has been normalized, thermal cycled and surface ground and lightly etched.
***PAY ATTENTION***
The overall size is 7 1/2" long by 1 5/16" wide. The dimension of the full, usable piece with allowing for end waste and clean edges is:
5" x 1 3/16" x .165" thick. You might squeeze a bit more out depending on how you cut/use it but it's at least that big.
I rough ground a quick and dirty mock bevel on one end so you can see what a blade might look like.
Price is $75 shipped. PayPal preferred. US sales only.