First attempt at trying to make a slip joint

Mikey, that looks good, good fit, and nice "snap". You're for sure on the right track. Look forward to more pics of progress.

Ken H>
 
I'm in the same boat as Justin with knowing nothing but it sure looks good to me!
 
Mikey, got an still pics? I've tried the last two nights and your video won't open for me, just sits there hour glassing and says "waiting on photo..." Curiosity is killing me.
 
a few pics for the guys who's having a problem uploading the video. Please let me know what "WRONGS" are going on here.. Thanks.

s1288.photobucket.com/user/BACKTINES/media/Mobile%20Uploads/20150106_074457_zps86569115.jpg.html]
20150106_074457_zps86569115.jpg
[/URL]
s1288.photobucket.com/user/BACKTINES/media/Mobile%20Uploads/20150106_074251_zpsa7f0811e.jpg.html]
20150106_074251_zpsa7f0811e.jpg
[/URL]
s1288.photobucket.com/user/BACKTINES/media/Mobile%20Uploads/20150106_074238_zpsbc48365d.jpg.html]
20150106_074238_zpsbc48365d.jpg
[/URL]
s1288.photobucket.com/user/BACKTINES/media/Mobile%20Uploads/20150106_074039_zps48c43959.jpg.html]
20150106_074039_zps48c43959.jpg
[/URL]
s1288.photobucket.com/user/BACKTINES/media/Mobile%20Uploads/20150106_074144_zpsc99f8a36.jpg.html]
20150106_074144_zpsc99f8a36.jpg
[/URL]
 
Last edited:
Look's Good, I've only made a few myself, but it looks like your headed in the right direction. Keep us posted on your progress.

Jim
 
Yes you're on the right path. One thing I see is the spring should be longer. See the corner of the tang in the last picture? The spring isn't long enough to cover that corner which makes the corner wear off quicker. Of coarse if the spring were longer the notch on the blade would need to be cut the same amount.
 
Last edited:
Bruce Bump said:
Yes you're on the right path. One thing I see is the spring should be longer. See the corner of the tang in the last picture? The spring isn't long enough to cover that corner which makes the corner wear off quicker. Of coarse if the spring were longer the notch on the blade would need to be cut the same amount.
Click to expand...

I see it bruce thanks. Now I need a little more gittyup to finish it.
 
You must log in or register to reply here.
Back
Top