Hello from Stafford, VA

Casey Brown

Well-Known Member
Hey, everyone. Didn't realize this forum existed until today. Been making knifes now for a couple of years, slowly through stock removal. Bought an anvil and just received my gas forge yesterday, so hoping to be moving to forging shortly. I love feedback and constructive criticism, so always glad to hear from those with more experience than me.

Thanks for the add,

Casey
 
I can do that. Not much to show. Started out making bushcraft knives, but have moved to doing flat grinds lately. Here is the first "successful" knife I made.
 

Attachments

  • #2.jpg
    #2.jpg
    290.3 KB · Views: 9
  • IMG_20170101_213412804_resized.jpg
    IMG_20170101_213412804_resized.jpg
    87.9 KB · Views: 8
My wife made me make a knife for each daughter in my first batch.
 

Attachments

  • 0704161759_resized.jpg
    0704161759_resized.jpg
    74.7 KB · Views: 10
  • 1122161632a_resized.jpg
    1122161632a_resized.jpg
    60.2 KB · Views: 10
One from a new batch of bushcraft. Changed the style a little bit. Tried my first flat grind on one of these, with so-so results.
 

Attachments

  • 039_resized.jpg
    039_resized.jpg
    127.7 KB · Views: 8
  • IMG_20170201_203011_resized.jpg
    IMG_20170201_203011_resized.jpg
    61.5 KB · Views: 8
Last edited:
Here's a prototype for a new batch I've done with flat grinds.
 

Attachments

  • 1006171829_resized.jpg
    1006171829_resized.jpg
    121.4 KB · Views: 8
Last edited:
Welcome. you will not find a friendlier forum than this one. Very helpful knowledgeable folks on here and willing to help us new comers.
 
Back
Top