cardoso5fr
Well-Known Member
As i have scrap, and because my moral is not to the top, in order to feel better, i did some kiridashi and kogatana
10 kiris in 115w8 oil hardening 810°c (keep to the température 10mn). Double tempering to 175°c during 45mn. 6 hollow grind with a 200 mm wheel, 4 with hollow grind with that a 150mm wheel.
3mm thick . The size is between 5,5 and 12,5 cm long and between 1,5 and 4 cm sharp
For more picture of filework and in hand
http://dremeltingpotes.free.fr/pages/kiridashi/kiri10.html
And 3 niolox kogatana, , 1040°c hardening and tempered too 160-175°c x2. Between 4.5-5.5 cm sharp and between 12-14 cm long.
10 kiris in 115w8 oil hardening 810°c (keep to the température 10mn). Double tempering to 175°c during 45mn. 6 hollow grind with a 200 mm wheel, 4 with hollow grind with that a 150mm wheel.
3mm thick . The size is between 5,5 and 12,5 cm long and between 1,5 and 4 cm sharp
For more picture of filework and in hand
http://dremeltingpotes.free.fr/pages/kiridashi/kiri10.html
And 3 niolox kogatana, , 1040°c hardening and tempered too 160-175°c x2. Between 4.5-5.5 cm sharp and between 12-14 cm long.
