Knife Photos by Caleb Royer

Caleb Royer

Well-Known Member
Hey guys, I'll post all of the new knife images I do in this one thread instead of multiple threads. Thanks for looking and enjoy!

___________________________________________

Maker: Josh Fisher JS

Specs:
San Mai 2 7/8” blade with 416 stainless steel on the outer and a 1095 core.
Stag handle and blued backspring.
6 1/2” overall.

48088470487_fe02075c40_b.jpg


___________________________________________
 

Caleb Royer

Well-Known Member
Maker: Robert Burns
Specs: San mai bowie: Forged from stainless san mai with a nine inch blade this knife also features a wrought iron guard covered in melted gold, and fossilized walrus ivory handle.


48171600232_7e4b71696f_b.jpg




___________________________________________



Maker: Karis Fisher
Specs: 1084 6” blade.
Desert ironwood handle.
Frame and fittings are hot blued mild steel.
10 1/2” overall.


48171529861_e6f269d92e_b.jpg




___________________________________________



Maker: Stephen Leland
Specs: Hunter/utility knife. O-1 steel blade, oosic handle.
6” blade.
10 3/4” overall.


48171528211_f1090777aa_b.jpg




___________________________________________



Maker: Don Sylvest
Specs: Natchez Fighter.
CPM 154.
Golden maple burl scales.
4 7/8” blade.
9 1/4” overall.


48171527391_0645fdc6ed_b.jpg




___________________________________________



Maker: Paul Baker
Forged blade from 1084.
416 stainless guard.
316 stainless and brass spacers.
A2 tools steel frame.
Blued mild steel liners.
Stainless pins.
Scales are S grade ivory replacement.
Scrimshaw is done with a needle and India ink.


48171524051_d06b6bef2a_b.jpg




___________________________________________



Maker: Rudy Dean
Specs: 336 layer damascus, 9 1/2” blade.
Combat tomahawk grind.
Curly red oak 16 3/4” handle.
Tooled leather sheath..


48171522916_7f16e096a6_b.jpg




___________________________________________



Maker: Shane Atwood
Freedom Fighter Model with a 3.5" blade of Nichols Rain Drop Damascus. Back spacer and pocket are also Nichols Damascus. Bolsters and 2x2 twill carbon fiber. Handles are premium Deser Ironwood. Copper pivot collars, titanium screws, & 1/8" thick titanium liners. All titanium has been heat anodized. Blade is running on a precision 3/16" pivot & caged ceramic bearings.
This knife was donated to The Friends of NRA Banquet in Vernal, UT.


48171605677_990d14d1ac_b.jpg
 

Chris Railey

Well-Known Member
Wait a minute while I clean the drool off of my keyboard...Those pictures are just awesome you got skill.
 

Caleb Royer

Well-Known Member
___________________________________________

Maker: John M Cohea
12” blade of Chad Nichols.
Reforged random pattern Damascus with a copper etch.
Stag crown handle with a copper ferrule.
17” overall.


48234173931_80a1a561ae_b.jpg





___________________________________________

Maker: Robert Burns
Fighter: This bowie showcases 12 inches of Turkish twist damascus, a copper shield. This knife also features heat colored and etched wrought iron guard, spacer, and frame with exhibition grade desert ironwood burl handle.


48234242602_1b6149b837_b.jpg





___________________________________________

Maker: Paul Lusk
416 layer carbon Damascus with a stainless steel palm.
4” blade.
5 3/8” overall.


48234169371_622db594f1_b.jpg





___________________________________________

Maker: Stephen Leland
S. F. Bowie. Walrus ivory handle with brass liners and n.s. guard and sheath.
6” blade.
10 3/4” overall.


48234172541_ee2b5bbc96_b.jpg




___________________________________________

Maker: Shane Atwood
Atomic Folder with 3.5" blade of Chad Nichols stainless San mai Boomerang damascus with a XHP core. Back spacer and pivot collars are also San mai Damascus. Bolsters are darkened Zirconium, handle scales are India Stag, thumb studs, pivot screws, handle screws, and 1/8" liners are anodized blue titanium. The blade is on a 316" precision pivot and caged ceramic ball bearings.


48234244902_0d2db087f9_b.jpg




___________________________________________

Maker: Don Sylvest
CPM 154.
Stainless bolsters.
Desert ironwood burl.
5 1/4” blade.
9 1/2” overall.


48234172006_3c1e2ebfdc_b.jpg




___________________________________________

Maker: Will Manning
416 stainless clad 1095 carbon steel, double nickel.
Stabilized cedar burl, copper bolster & G10 frame handle.
321 grams! She's a heavy weight!
The san mai is my own shop made stainless clad and the name of this one's La Gran Monstrua. A trailing point chefs knife made with those lovers of meat in mind, but also great for kitchen defense.
10 1/2” blade.
16 1/2” overall.


48234168846_af210d863a_b.jpg
 

Caleb Royer

Well-Known Member
Maker: Stephen Leland
Fine utility knife. Damascus steel blade with n.s. bolster and buffalo horn handle.
5 7/8” blade.
10 5/8” overall.


48293923602_a0ab2b2291_b.jpg




___________________________________________

Maker: Lee Lerman
blade: Vinland pattern Damasteel.
Handle: white mother of pearl, Titanium bolster lock frame.
Engraving and gold inlays by Pedro Villarrubia.


48293921497_8c3d39d823_b.jpg




___________________________________________

Maker: Lon Humphrey JS
Specs:
10 9/16” overall length.
5 5/16” blade.
4 5/8" cutting edge.
Steel: 52100.
Copper guard.
G10 spacers and brass.
Artifact walrus ivory for the handle.


48293820546_f8170ff12b_b.jpg




___________________________________________

Maker: Stephen Vanderkolff
Mother Nature has done some wondrous things to rock creating this Crazy Lace Agate. These pieces were found in Mexico and transformed into the slabs for a little slip joint. The depth and the colour are hard to capture but peering into the rock made me think of the Beatles Yellow Submarine movie. Psychedelic waves of colour and shapes.
The knife itself has a 154 CPM blade and backspine and a 416 body with double integral bolsters. It is 3 1/4" closed and 5 3/4" open . It is a snappy little guy with Dellana Dots for an opening grip system.


48293822936_fa2b4ab994_b.jpg




___________________________________________

Maker: Kyle Deming
13" OAL, 2" wide, 440C hollow ground on the right side, flat on the left, single 20 degree cutting edge. Handle is green pearl Kirinite on brass liners with dovetailed hammered brass bolsters and brass pins. Mirror polished vine pattern filework throughout.


48293822181_8b4797f78a_b.jpg




___________________________________________

Maker: Rubem Lorenz
I put 10 meteor inside the eagle head.
My own carbon fiber with gold e silver points.


48293821746_2600d6bc53_b.jpg




___________________________________________

Maker: Ismael Biegelmeier
Forged knife with 8" blade, in Damascus Turkish spirograph with 6 bars handle on a beautiful giraffe bone.


48293822566_afedb7ae27_b.jpg




___________________________________________

Maker: Gene Kimmi
Specs:
The blade is forged from 39 layers of twisted 1084 and 15N20. The guard and pommel were forged from 55 layers of twisted 1084 and 15N20, both fluted. All damascus was hand hammered and finished with a coffee etch. The handle is a piece of desert ironwood burl.


48293921117_5a297f7ca1_b.jpg
 

Caleb Royer

Well-Known Member
Maker: Mike Nelson
7 3/4” Blade.
4 3/4” Handle.
W2 Steel.

48490907256_063b4cfe8e_b.jpg




___________________________________________



Maker: Stephen Leland
Ring dagger, 440c, Elephant ivory handle ( this ivory is from a baby elephant that died at the San Francisco Zoo).
Nickel silver guard and sheath.
6” blade.
10 3/4” overall.

48490909741_478da3b94f_b.jpg




___________________________________________



Maker: Stephen Leland
Sheffield Bowie. Elephant ivory (S.F. Zoo) handle, n.s. guard and throat and tip on leather sheath.
7” blade.
11 1/2” overall.

48491079317_d3da2fefd3_b.jpg




___________________________________________



Maker: Robert Burns
Puukko: Forged from mosaic damascus with bronze spacer, Minnesota Birch burl, and water buffalo horn handle.

48491078887_0234441d29_b.jpg




___________________________________________



Maker: Marcus Lin
4" Loveless Designed Semi-Skinner
Engraver: Alvin Chewiwi
Blade length: 3-3/4"
Overall length: 8-3/16"
Blade Material: Stellite 6K
Fittings: Hardened 416 Stainless Steel
Handle: Black Linen Micarta with red liners

48491078267_d16b32e32e_b.jpg




___________________________________________



Maker: Tyler Hall
W2 Steel.
7 1/2” Blade.
12 1/2" Overall”
Stabilized amboyna burl handle with wrought iron guard and copper spacer and pin.

48491077427_301693d787_b.jpg







___________________________________________

Maker: Kyle Royer MS
Orion's Sword
36" Complex Mosaic "Nebula" Damascus Blade with 1/4" Fuller
10" Bastard Style Handle
46" Overall
24K Gold Inlays
24K Gold Makers Mark
Fluted Fossil Walrus Ivory Handle
Steel Fittings with "Black Mirror" Finish
Premium Leather Scabbard made by Kyle Royer

48727064088_51c0ed028c_h.jpg
 
Last edited:
Top