Kydex Sheath Tutorial 4 part video 46 minutes

BossDog

KnifeDogs.com & USAknifemaker.com Owner
Staff member
[video=youtube;mKWe1vliHeY]http://www.youtube.com/watch?v=mKWe1vliHeY[/video]

[video=youtube;gR_cvZ9SjdY]http://www.youtube.com/watch?v=gR_cvZ9SjdY[/video]

[video=youtube;h87q-AXaAcA]http://www.youtube.com/watch?v=h87q-AXaAcA[/video]

[video=youtube;aT3fb13_8xU]http://www.youtube.com/watch?v=aT3fb13_8xU[/video]
 

murphda2

Super Moderator and KD Blade Show Boss
Boss, I see a future in infomercials when you retire from your day job. Tutorial looks great. Wish you had had this posted two years ago, it would have saved me alot of trial and error.
 

Steven Janik

SUPERMOD & AWARDS BOSS
You did, however, skip the part where the drill press grabs it and whips the tar out of you and then you grab at it while spinning and it steals your last good glove.
 

BossDog

KnifeDogs.com & USAknifemaker.com Owner
Staff member
You did, however, skip the part where the drill press grabs it and whips the tar out of you and then you grab at it while spinning and it steals your last good glove.

I actually filmed that on purpose (well a not the spinning part) but I lost it in the first "take" and forgot to repeat it on the second pass. Everyone should (and will) get to experience that when working with Kydex..
 

Denny Eller

Well-Known Member
Thank you for doing this, T. I have my press ready to glue and screw and all of the questions I had you answered. It makes it a lot simpler after watching it done, too. Two thumbs up!!!!!!!!
 

BossDog

KnifeDogs.com & USAknifemaker.com Owner
Staff member
Thank you for doing this, T. I have my press ready to glue and screw and all of the questions I had you answered. It makes it a lot simpler after watching it done, too. Two thumbs up!!!!!!!!

Glad to do it. Shooting it is trivial. Adding a 2nd camera, remote wireless sound (not used in this one) adds a little bit of difficulty. Learning Premiere Pro CS5 video software is HUGELY difficult. This video was good practice for the heat treat one I am working on.
 

John T Wylie Jr.

Rockstar and ACE vBulletin troubleshooter
Glad to do it. Shooting it is trivial. Adding a 2nd camera, remote wireless sound (not used in this one) adds a little bit of difficulty. Learning Premiere Pro CS5 video software is HUGELY difficult. This video was good practice for the heat treat one I am working on.

Indeed , I just got back from CS5 Premiere and After Effects Boot Camp in San Diego.... cool stuff though , with a lot of options.
 

BossDog

KnifeDogs.com & USAknifemaker.com Owner
Staff member
Indeed , I just got back from CS5 Premiere and After Effects Boot Camp in San Diego.... cool stuff though , with a lot of options.

I am working my way through my second 15 hour training course and that is just for CS5 Premiere. I haven't cracked the books yet on After Effects, Sound Booth or Encore. I could use going to a boot camp.
 

Thunter124

Well-Known Member
Glad to do it. Shooting it is trivial. Adding a 2nd camera, remote wireless sound (not used in this one) adds a little bit of difficulty. Learning Premiere Pro CS5 video software is HUGELY difficult. This video was good practice for the heat treat one I am working on.

Ah that sounds like a tutorial I would like to watch
 

BossDog

KnifeDogs.com & USAknifemaker.com Owner
Staff member
The first batch of tutorials I watched were at Lynda.com
The second is a new release DVD Aodbe Learn by Video Premiere Pro Cs5
 

BossDog

KnifeDogs.com & USAknifemaker.com Owner
Staff member
slow, it's the Christmas rush here. I am half way through my second batch of video sessions but had to pause for a bit. Back on it after the 1st.
 

cappaletti

Well-Known Member
Tracy...getting ready to make my 1st kydex sheath for a 'tactical' style knife I am finishing up (got my micarta handle slabs and corby pins from u guys!)..gotta say this tutorial was exactly what the doctor ordered! THANK YOU SO MUCH for all ur time and energy in putting this together!!! God bless...
 

BossDog

KnifeDogs.com & USAknifemaker.com Owner
Staff member
Tracy...getting ready to make my 1st kydex sheath for a 'tactical' style knife I am finishing up (got my micarta handle slabs and corby pins from u guys!)..gotta say this tutorial was exactly what the doctor ordered! THANK YOU SO MUCH for all ur time and energy in putting this together!!! God bless...

excellent. that is what I was hoping for.
 

HELLGAP

Dealer - Purveyor
Tracey excellent tutorial I will make one tommorrow. Where did you buy the 1 inch thick Neopren. I have never seen it that thick. ??? thanks kellyw
 
Top