Maker retiring, equipment available

Heikki

KNIFE MAKER
I've been in contact with Dan Freda of DF Custom Knives and have his permission to share this information. He is retiring and will be selling all his knife making equipment: belt and disc grinders, oven, even a mill. It's pick up only in Red Creek, NY (Finger Lakes area). You can get details and how to contact him from his Instagram @dfcustomknives.

I thought there might be interest on this forum. Hope this sharing is allowed.
 
Here’s the list he gave me for those interested:

Thanks for your interest in my equipment.. Everything is in good working order. I’m located in the 13143 area code, and you must be willing to pick this stuff up (unless you live within a couple hours, in which case I could deliver).

Equipment:
1. Pheer 454 2x72 Grinder with the following attachments and upgrades:
a. 3HP Leeson Motor (Direct Drive)
b. Lenze Vector VFD (an upgrade over the KBAC systems you see often)
c. 12” smooth contact wheel
d. 8” serrated contact wheel
e. Flat Platen
f. Small wheel attachment
g. DD Work Rest
h. What I paid: $2,800+
2. LMS HiTorque Bench Mill
a. Tons of carbide endmills
b. Collets of various sizes
c. Milling vice and mounting hardware
d. What I paid: $2,200+
3. Evenheat KF22 heat treat oven with TAP Controller & Bill Burke Mod
a. What I paid: $1,700
4. Pheer Disk Grinder
a. 1 HP motor
b. KBAC VFD
c. TruGrit table and work rest
d. What I paid: $875
5. Craftsman 14” Band Saw
6. Kool Mist system (with compressor)
7. Grizzly 2x72 Belt Grinder (1HP)
8. Delta Drill Press
9. Home Made Air Filtration System (Squirrel Cage Blower & Furnace Filters)
10. I also have well over 100 blades that are ground out and heat treated, just waiting for handles. I have blades from most of my regular models left over. These will be included, if interested.
 
Back
Top