My First Scandi Grind

Don McNeil

Well-Known Member
Here is a Bushcrafter I made for a guy in Pennsylvania.
Blade is 3/16" O1 and 5 3/8" Long
Overall Length is 9 5/8"
Handle is Cocobolo with black liners
Ferro Rod has a matching handle
Pins are Stainless SteelPICT0040.jpgPICT0028.jpgPICT0025.jpgPICT0032.jpgPICT0030.jpgPICT0035.jpg
 
I set my work table to the appropriate angle and ground against it. I do my full flat grinds freehand but this was my first Scandi so I used the table. I had to modify my Coote grinder because it wasn't designed for that steep of an angle.. Thanks for the compliments guys.
 
Back
Top