New KnifeDog KD4 2"x72" Grinder

[Luke Hoff USAknifemaker]

New 2"x72" grinder design we are building in house at USAknifemaker.com. The KD4 is built with sturdy 3/8" thick steel plasma cut at our shop. This grinder can be configured for direct drive or set up for pulley drive. Below is handful of photos from the shop build as well as the website photos. Links are just below as well

KD4 KnifeDogs Grinder Kit 2" x 72"

<p><strong>KD4 New KnifeDogs Grinder Kit</strong></p><p>2"x72" grinder kit includes</p><p>Frame</p><p>Drive wheel</p><p>Tracking wheel</p><p>KD4 Grinder Kit is a very simple-to-assemble kit built from 3/8" thick plasma cut steel. This kit can be assembled in less than an hour with a basic set...

usaknifemaker.com

KD4 KnifeDogs Grinder Kit 2" x 72" - 2HP and VFD

KD4 New KnifeDogs Grinder Built with 2HP Motor and VFD 2"x72" grinder includes Frame Drive wheel Tracking wheel KD4 Grinder Kit is assembled from 3/8" thick plasma cut steel. Kit includes all hardware needed besides the hardware you will need to bolt to a workbench. KD4 is a Direct drive setup...

usaknifemaker.com

 

[Heikki]

I can't quite tell from the photos, but it looks like you can mount a vfd to it too?

 

[Coop]

Awesome price range. Does it come with any accessories. Platen?

 

[Luke Hoff USAknifemaker]

I can't quite tell from the photos, but it looks like you can mount a vfd to it too?

Yes, there are a couple photos in the listing that show it better. There is a plate that attached to the table bracket of the motor that you can attach the VFD to.

 

[Luke Hoff USAknifemaker]

Awesome price range. Does it come with any accessories. Platen?

Currently it can be ordered with a 8" wheel or a flat platen. Are small wheel attachment will work as well on it.