the 2015 Bowie project

GHEzell

Well-Known Member
The guy who taught me to forge and make knives is a bowie knife fanatic, and it has rubbed off on me just a little bit, I have a deep appreciation for the early, historic bowies. Recently I had a guy ask me for a "big, scary looking damascus knife" (I love orders with simple directions like this). I've always admired the work of George Woodhead, who made bowies in the 1900's out of Sheffield, so I decided to attempt on based loosely on his work. Somewhere along the line, I decided to make two of them...
rolleyes.gif


The frame handles were quite challenging, considering my usual seax handle philosophy of 'stick a piece of wood on it and call it finished'.... I estimate it took me 40 hours to make both handles.

Blades are 4 bar composites (1084 and 15n20 with w1 edges), copious amounts of brass for the fittings, and paper micarta and Jobillo wood for the handles.
12047120_1667986403445993_4968527687147872504_n_zpszph0owye.jpg12113516_1667986343445999_2128136911784968305_o_zpstwtlt8w6.jpg12107970_1667986373445996_8721128405033878109_n_zpsefzzjnry.jpg12115735_1667986340112666_7125551948667634557_n_zpsazlcgxdq.jpg

Lengths are 16 1/2" and 17 1/2"...
 
Very nice, Bowies are for some reason my favorite also, not sure why, maybe it's just that strong look they have. Anyway, great job.

Wayne
 
Back
Top