Freds Edge Well-Known Member Sep 21, 2014 #1 I'm about to make my first slip joint , I'm using cpm154c for the blade and wanted to know if the same material would wok for the spring. The frame will be 410 stainless .
I'm about to make my first slip joint , I'm using cpm154c for the blade and wanted to know if the same material would wok for the spring. The frame will be 410 stainless .
K R Johnson Well-Known Member Sep 21, 2014 #2 Yes, CPM 154 CM will work for the spring. I harden the spring along with the blade, then temper it at 1100F, 2 hours, 2 times.
Yes, CPM 154 CM will work for the spring. I harden the spring along with the blade, then temper it at 1100F, 2 hours, 2 times.