Just keep it going.
Im anodizing the two titanium plates
![](http://i104.photobucket.com/albums/m169/teklund/20150104_174848_zpssdy6d8ch.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150104_174929_zps7lsvv04a.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150104_180146_zpsnnbjzobm.jpg)
That is sooo cool. like magic.
starting the filework on the topbit.
![](http://i104.photobucket.com/albums/m169/teklund/20150105_131708_zpsdqmjj3wy.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_132014_zpsfwtjymkj.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140052_zps1cbr7rnu.jpg)
this is the files that i use.
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140107_zpsfkcn7yom.jpg)
Ok fun fun fun. testmounting the knife.
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140154_zpsmhmfhhzx.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140244_zpshlamr353.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140237_zpssmtsubiz.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140229_zpsx1mulvbc.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140216_zps2vdolmbu.jpg)
There is some thing left to do.
I sand and mirrorpolich the riccaso cuse i think it will be a cool effect.'
![](http://i104.photobucket.com/albums/m169/teklund/20150106_125801_zpsamxohnsd.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_124530_zpsru3a60i5.jpg)
sanding and policed the topbit
![](http://i104.photobucket.com/albums/m169/teklund/20150106_114234_zpsk2gqokr3.jpg)
I have to sharping the blade before assambling becuse the guard will be in the way when mounted.
You can do a light sharping when the guard is there but not grind a cutting edge.
![](http://i104.photobucket.com/albums/m169/teklund/20150106_140018_zpsl5ctthmr.jpg)
Polich all parts and checking them befor glue.
![](http://i104.photobucket.com/albums/m169/teklund/20150106_144405_zpsuat9azrv.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_144357_zpsji9so8od.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_144401_zpswmewl1ca.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_144352_zpsu5sgkkea.jpg)
Glue and the knife is done. Finally!!!
![](http://i104.photobucket.com/albums/m169/teklund/20150106_183847_zpsjnwiyu7o.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_183901_zps9o3vrxmr.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_183912_zpsxzqlmihh.jpg)
Sheathtime!
cut out the leatherparts
![](http://i104.photobucket.com/albums/m169/teklund/20150107_102350_zpsptyllmxn.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150107_103654_zpsqwbfhxc3.jpg)
I do not think that somebody is going to carry this knife around so the shath is more like an blade and edge protectian.
Marking were the stich are going to be.
![](http://i104.photobucket.com/albums/m169/teklund/20150107_103812_zpslfkus5su.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150107_104124_zps9wr9lj1b.jpg)
Drilling holes for stich.
![](http://i104.photobucket.com/albums/m169/teklund/20150107_153531_zpstraoku2f.jpg)
I have this crazy old lizzardskin laying around in my workshop so i thing it will real nice to this knife.
Glue the leather to the lizzadrskin.
![](http://i104.photobucket.com/albums/m169/teklund/20150107_103406_zpsgltclojb.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150107_155359_zpsqwpfhdme.jpg)
Sawing the sheath
![](http://i104.photobucket.com/albums/m169/teklund/20150107_164810_zpsiigzghdd.jpg)
The only thing left is to grinr the edges down but i forgot to take pic sorry guys
![](http://i104.photobucket.com/albums/m169/teklund/20150107_193007_zps6t3zmjq2.jpg)
i use a dremel and a sandingdrum for that job
![](http://i104.photobucket.com/albums/m169/teklund/20150108_090648_zpsslkgwbfi.jpg)
Making a simple stand in walnut for the knife
![](http://i104.photobucket.com/albums/m169/teklund/20150108_095746_zpspqivay8d.jpg)
And the knife is done
Here is some pic of my table in helsinki knifeshow. sorry for blur.
![](http://i104.photobucket.com/albums/m169/teklund/20150109_131918_zpsdz2ytbji.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150109_131838_zpsmhnpzmw1.jpg)
Here it is FERRUM FLOS.
![](http://i104.photobucket.com/albums/m169/teklund/Tommy20Eklund_zps350b1b58.jpg)
Thanks for looking
Tommy
Im anodizing the two titanium plates
![](http://i104.photobucket.com/albums/m169/teklund/20150104_174848_zpssdy6d8ch.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150104_174929_zps7lsvv04a.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150104_180146_zpsnnbjzobm.jpg)
That is sooo cool. like magic.
starting the filework on the topbit.
![](http://i104.photobucket.com/albums/m169/teklund/20150105_131708_zpsdqmjj3wy.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_132014_zpsfwtjymkj.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140052_zps1cbr7rnu.jpg)
this is the files that i use.
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140107_zpsfkcn7yom.jpg)
Ok fun fun fun. testmounting the knife.
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140154_zpsmhmfhhzx.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140244_zpshlamr353.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140237_zpssmtsubiz.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140229_zpsx1mulvbc.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150105_140216_zps2vdolmbu.jpg)
There is some thing left to do.
I sand and mirrorpolich the riccaso cuse i think it will be a cool effect.'
![](http://i104.photobucket.com/albums/m169/teklund/20150106_125801_zpsamxohnsd.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_124530_zpsru3a60i5.jpg)
sanding and policed the topbit
![](http://i104.photobucket.com/albums/m169/teklund/20150106_114234_zpsk2gqokr3.jpg)
I have to sharping the blade before assambling becuse the guard will be in the way when mounted.
You can do a light sharping when the guard is there but not grind a cutting edge.
![](http://i104.photobucket.com/albums/m169/teklund/20150106_140018_zpsl5ctthmr.jpg)
Polich all parts and checking them befor glue.
![](http://i104.photobucket.com/albums/m169/teklund/20150106_144405_zpsuat9azrv.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_144357_zpsji9so8od.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_144401_zpswmewl1ca.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_144352_zpsu5sgkkea.jpg)
Glue and the knife is done. Finally!!!
![](http://i104.photobucket.com/albums/m169/teklund/20150106_183847_zpsjnwiyu7o.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_183901_zps9o3vrxmr.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150106_183912_zpsxzqlmihh.jpg)
Sheathtime!
cut out the leatherparts
![](http://i104.photobucket.com/albums/m169/teklund/20150107_102350_zpsptyllmxn.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150107_103654_zpsqwbfhxc3.jpg)
I do not think that somebody is going to carry this knife around so the shath is more like an blade and edge protectian.
Marking were the stich are going to be.
![](http://i104.photobucket.com/albums/m169/teklund/20150107_103812_zpslfkus5su.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150107_104124_zps9wr9lj1b.jpg)
Drilling holes for stich.
![](http://i104.photobucket.com/albums/m169/teklund/20150107_153531_zpstraoku2f.jpg)
I have this crazy old lizzardskin laying around in my workshop so i thing it will real nice to this knife.
Glue the leather to the lizzadrskin.
![](http://i104.photobucket.com/albums/m169/teklund/20150107_103406_zpsgltclojb.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150107_155359_zpsqwpfhdme.jpg)
Sawing the sheath
![](http://i104.photobucket.com/albums/m169/teklund/20150107_164810_zpsiigzghdd.jpg)
The only thing left is to grinr the edges down but i forgot to take pic sorry guys
![](http://i104.photobucket.com/albums/m169/teklund/20150107_193007_zps6t3zmjq2.jpg)
i use a dremel and a sandingdrum for that job
![](http://i104.photobucket.com/albums/m169/teklund/20150108_090648_zpsslkgwbfi.jpg)
Making a simple stand in walnut for the knife
![](http://i104.photobucket.com/albums/m169/teklund/20150108_095746_zpspqivay8d.jpg)
And the knife is done
Here is some pic of my table in helsinki knifeshow. sorry for blur.
![](http://i104.photobucket.com/albums/m169/teklund/20150109_131918_zpsdz2ytbji.jpg)
![](http://i104.photobucket.com/albums/m169/teklund/20150109_131838_zpsmhnpzmw1.jpg)
Here it is FERRUM FLOS.
![](http://i104.photobucket.com/albums/m169/teklund/Tommy20Eklund_zps350b1b58.jpg)
Thanks for looking
Tommy