Shawn Hatcher
Well-Known Member
This is a prototype hunter/utility that I just finished this morning. I ground the bevels of this knife using a 36" radius platen made by Nathan the Machinist. The result is a very subtle hollow grind that I find very appealing. This knife also has a subtle convex edge, something I've been practicing and will be doing much more of.
Thank you for checking out my work. :biggrin:
-.140" CPM154 stainless steel heat/cryo treated by Peters to 60 RC
-8.75" OAL
-5" blade
-7 ounces
-Hollow ground primary bevel using 36" radius platen
-Convex edge
-Tumbled finish
-Desert ironwood scales with cocobolo burl bolsters, black/white G10 liners/dividers, and carbon fiber pins
Size comparison with my Jaybok and SFB.
Thank you for checking out my work. :biggrin:
-.140" CPM154 stainless steel heat/cryo treated by Peters to 60 RC
-8.75" OAL
-5" blade
-7 ounces
-Hollow ground primary bevel using 36" radius platen
-Convex edge
-Tumbled finish
-Desert ironwood scales with cocobolo burl bolsters, black/white G10 liners/dividers, and carbon fiber pins
Size comparison with my Jaybok and SFB.