reversed edge fighting knife

Scott Davidson

Scott Davidson

Well-Known Member
Here is one that i just finished up , thanks for looking . The over-all is just over 13 inches , and 2 inches wide. Scott
 

Attachments

  • 20100514_1.jpg
    20100514_1.jpg
    97.9 KB · Views: 95
  • 20100514_5.jpg
    20100514_5.jpg
    98.9 KB · Views: 65
  • 20100514_9.jpg
    20100514_9.jpg
    98.4 KB · Views: 75
  • 20100514_17.jpg
    20100514_17.jpg
    44.7 KB · Views: 88
Very nice piece, Scott. tell us more about it please.

I do have to say I think you are the first maker I have seen who puts his maker's mark on both sides of the blade! Is that becoming common and I have missed it?
 
No sir you have not missed anything at all . This is a knife for a guy in the military and i just don't want anyone who looks at it to miss my name . I do not do this on all my knives .

The blade steel is 440C and the handles are micarta. The sheath is the heavy weight kydex and to finish it off is a large tek-loc. The over-all is about 13 inches , and its 2 inches wide at the widest point .The handles are installed with some bolts and a nice mosaic pin to give a little eye candy to look at .I did not design this piece , it was made from the owners pictures and drawings Scott
 
Last edited:
I like the knife and the design a lot, Scott, form and function. Do you think the designer will allow you to make more of them? If so, any idea what they may cost.

I'm glad you don't do that to all of your knives, but I understand why you did it on that one. Now if I see another like that, I am going to have to nickname you "Nike"!

2thumbs
 
I hear ya . Yes i can make more of the knives , not a problem at all. I posted pictures on another site last nite and have take 4 , possibly 5 orders since last nite . I would be happy to make you one . Scott
 
Nicely done Scott. Looks like it should be an intimidating soldier's knife.

I need to find out where else you're posting. :D

Carey
 
You must log in or register to reply here.
Back
Top