$75 Hunting Utility blades
Selection of Hunter/Utility Blades
That time will be here before you know it!
First shot is of the group so bear with me and see the pics below for better shots.
OAL is 8 1/2" blade is approx 4" tip to front of bolster
Nice deep hollow grind for a lifetime of...
Ok one of these years I will get of my Duff and take a Jewelry making or Metal Crafts course at the local Comm College... Till then need your help.
Could use some direction for a good Arts Crafts site for techniques of Texturing Finishing metals...
There are many Artists here who make knives...
Two other things may be contributing to this: Worn belts and using a Belt that you have worn a groove in by doing profiles on it... I keep my profile belts separate from my grinding belts.
Worn out belts make you push harder IE: Less control. Try a new belt, go slow and steady. BE Elvis and...
Finally got my Frame lock design to work :biggrin:
Now need to be a bit more precise and make some stiffer frames.
What is the Difference between a Mechanical Digital Micrometer and an Electronic one in terms of accuracy and longevity?
What thickness of Ti might be best for a smallish...
We are getting there slow but sure!
Got her smooth as butter, perfectly centered blade, no side play and thin washers as well...
Need to get a finish put on but it's getting close.
Pre-Season Selection Hunter/Utility WhiteTale
That time will be here before you know it!
First shot is of the group so bear with me and see the pics below for better shots.
OAL is 8 1/2" blade is approx 4" tip to front of bolster
Nice deep hollow grind for a lifetime of Re-sharpening...
Great advice! Took a few pics today of a Jig that hopefully will work to get the Bushings to size and keep everything squared-up.
Bushings are press fit in place, then a washer added. Surface grind both flat and Repeat. Re-Lap the washers for clearance.
Of course I have no 1/4" ID washers...
Final Fitting of Pivot...
Goal is to make a butter smooth Professional custom
Constructing some Bali's but the same is true for regular folders that use a Pivot with a screw. They are sandwich style.
Need to adjust the length of the Pivot barrel and get it flat.
Using Alpha Knife supply...