Recent content by Sadowski

What do you think about this one :) ? GRYPHON: OAL: 266mm Blade: 130mm Bevel Height: 20mm Handle: 125mm STEEL: Bohler N690 4,5mm - ~59-60HRC (Not Cryo) Scales: G10 black 6,5mm Textured , mounted with M5 Torx Sec T25 screws.

Notch in blade mainly was for esthetical purpose, and in occasion for using with firesteel :)

By the way, what do you people think about my knives? What things can be better and what things to erase from knives ?

If All will go ok ( with getting Green Card) in 2016 I'll go to the US Army for 3 years. Then will be small break in knifemaking for me or going to part time, and then only I will making folder knives.

Hey, Business going good, I promoting my knives on FB and some forums. Cheers, Konrad Sadowski

Hello guys! Some time passed... And Here are some recenty finished 3 knives :) SK Manticore AOL: 250mm / 9.84 inch Blade: 110mm / 4.33 inch Bevel Height: 27mm / 1.06 inch Handle: 120mm / 4.72 inch STEEL: Bohler M390 4,3mm / .169 inch ~59HRC Scales: G10 black 6,5mm / .255 inch...

M390 - EDC - 3,77 inch blade - SPHINX - SOLD Hello, I have one EDC type knife to sell here :) Made from Bohler M390PM micropowder steel with Black G10 scales mounted by screws M5 Torx Sec T-25. Data of the knife :) !SOLD! SPHINX 029/2014 !SOLD! Blade: 96mm / 3.77 inch AOL: 232mm / 9.13...

How about this little guy prototype ? :D

Hello again, I have some small questions: 1. Where to get 72 inch radius platen for KMG ? 2. What is a good anti-scale compound for max 900-950* ? 3. What is best Edge at the end of grinding ?

Steel: 80CrV2 3mm 60HRC Scales: Oak Burl

I'll sugest O1 steel. :)

Two knives ready :) Skylark with Black G10- Sandblasted. Steel: 80CrV2 3mm Hardness: 60HRC +/-1HRC Blade: 80mm Whole lenght : ~190mm

When I waiting for Carbon Fiber 3mm Rod for pins, ( for knives with G10) I made this little guy :) Steel: 1065 Thickness: 5mm Now this knife will wait when I made rest of knives from 1065 and NC6, then they'll go to HT. G10 or Cherry/Walnut/Hornbeam for this knife? Or even Brown Linen...

3 will be with 6,5mm G10 + 3mm carbon fiber pins 3 will be with wood, 1x cherry, 1x oak burl, 1x hornbeam Steel: NCV1 (80CrV2) 3mm 60HRC (+/- 1HRC)

After storm... My VPI is burned... Grinding stopped after I get VPI back from repair >.> And 9 small knives was send to HT :) Edit: 4.07.2014 Knives back from HT, and clean by sandblast :) Now I waiting for a new VPI to finish knives.