Recent content by slatercreek

  1. S

    Latest acquisition. 100lb hammer

    Dang! That was quite the informative response. There's lots of things to take into consideration dealing with one of these big hammers. Fortunately I know a guy that has plenty of experience with large hammers. He is a wealth of knowledge. I appreciate all input cause I need all the help I can get.
  2. S

    Latest acquisition. 100lb hammer

    With fall work almost done I can dedicate a little time to finishing my forging setup. Need to construct my forging press and build a larger forge. Optimistically be good to go by mid January.
  3. S

    Just another slippie.

    Thanks for the kind words everyone. I'm always striving to improve with each and every one.
  4. S

    25lb Little Giant followed me home.

    Thanks for the useful info Ed. I got the Fifty running today. Had it flinging grease/oil everywhere. Has the original motor as far as I could tell. Had to tear it down because it wouldn't run. Needs new brushes. I'm a rancher so improvising is what I do best. I super glued match sticks to the...
  5. S

    Just another slippie.

    :nothing:I only built three knives all winter. This being last. Damascus by me under the guidance of someone that knows considerably more than I do. Great experience. I'm pretty optimistic that I'll be set up to forge in my own shop by next winter.
  6. S

    25lb Little Giant followed me home.

    Got the 50lb hammer home. Called Little Giant to get the age on it. 1946 model. Turns out I'm the second owner. Delivered new to the man whose shop I got it out of. An old blacksmith now deceased. It's new home is only seven miles from its original home. Pretty happy to gather up both machines...
  7. S

    Does anybody?

    Most sewing machines marketed for leather these days are no more than glorified canvas sewing machines. A true leather stitcher is a needle feed machine without feed dogs. That way you don't mark the leather. I'm a saddle maker also. I have three different harness stitchers in my shop. All...
  8. S

    25lb Little Giant followed me home.

    This one is coming home tomorrow. 50 pounder.
  9. S

    25lb Little Giant followed me home.

    Thanks for the contact info. I have little experience with these so any advice will help.
  10. S

    25lb Little Giant followed me home.

    Thanks for the input Ed. I'm treating it like my antique harness stitchers. Oil them very generously. That's what I just did. Trust me it's dripping oil again.
  11. S

    25lb Little Giant followed me home.

    Gave this thing a thorough bath with the steamer today. Now I can see what I have. Fair amount on green paint under all that grease and grim. Everything seams pretty tight and nothing hinky looking. Pulled the three phase motor off and found an old motor in the back of the shop to serve as its...
  12. S

    25lb Little Giant followed me home.

    Not sure if I should admit that I only paid 400 dollars for this. A few days ago a friend told me that the fire department in a neigboring town was going to auction of some donated items from an old blacksmith shop. He had contacted the person in charge and was informed that there was going to...
  13. S

    Let's see your forging presses.

    Good deal we finally got another press picture. The cylinder I'm standing on is just an example of the size of cylinders I found in that yard. I'm waiting for the snow to go off so I can get a good look at the cylinders they have. That one just happened to be sticking out the edge of the of the...
  14. S

    Let's see your forging presses.

    3phase, 10 hp motor, dual stage pumps, 3000 psi. The frame is my biggest concern right now. Fortunately I have a brother that is a heck of a good welder fabricator. I wouldn't trust my own welds on this project. I didn't get to spend a lot of time at the yard where I found the cylinders but I...
  15. S

    Let's see your forging presses.

    This might be overkill. Power unit off of a thousand ton coining press. Just kind of followed me home. And I think I found where big hydraulic cylinders go to die. 40 cents a pound for whichever one I choose. Will this work Ed?
Top